Author Topic: Looking for V11 bar risers  (Read 3680 times)

Offline dl.allen

  • Gaggle Mentor
  • ****
  • Posts: 517
Looking for V11 bar risers
« on: October 20, 2015, 10:04:10 PM »
Anyone know if these are still available?  I think they were from Williamsville Competition?




Online Chuck in Indiana

  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • Posts: 29445
Re: Looking for V11 bar risers
« Reply #1 on: October 21, 2015, 05:36:26 AM »
I've never even seen those, much less know if they are available. I assume you've asked on the V11 lemans site?
(thinly disguised bump to the top)
Chuck in (Elwood) Indiana/sometimes SoCal
 
87 AeroLario
95 Skorpion tour
22 Royal Enfield Classic 3 fiddy
 "Two things are infinite: the universe and human stupidity; and I'm not sure about the universe."
Albert Einstein

Offline fotoguzzi

  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • *
  • Posts: 19931
  • vee git tooh soon oldt und too late wise -my Dad
Re: Looking for V11 bar risers
« Reply #2 on: October 21, 2015, 06:46:41 AM »
those bars look like V11 Sport clamps not like the Lemans I had.



seen with risers fabricated by a friend of mine, I have a set but need to get $200. and pay my friend back.. send email to   fotoguzzi@yahoo.com       and I can send you more pics.
MINNEAPOLIS, MN

Offline rocker59

  • Global Moderator
  • Gaggle Hero
  • *
  • *****
  • *
  • *
  • *
  • *
  • *
  • Posts: 24010
  • "diplomatico di moto"
  • Location: NW Arkansas
Re: Looking for V11 bar risers
« Reply #3 on: October 21, 2015, 07:34:15 AM »
those bars look like V11 Sport clamps not like the Lemans I had.


Agreed.  I think those are OEM clip-ons from an '00 to '02 V11 Sport.

On the Sport, they are fitted below the triple clamp.

I like the look, and the use of OEM parts !!!

 :thumb:
« Last Edit: October 21, 2015, 07:34:32 AM by rocker59 »
Michael T.
Aux Arcs de Akansea
2004 California EV Touring II
"Do what you can, with what you have, where you are." - Theodore Roosevelt

Wildguzzi.com

Re: Looking for V11 bar risers
« Reply #3 on: October 21, 2015, 07:34:15 AM »

Online Travlr

  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • Posts: 1137
Re: Looking for V11 bar risers
« Reply #4 on: February 20, 2018, 05:13:23 PM »
Agreed.  I think those are OEM clip-ons from an '00 to '02 V11 Sport.

On the Sport, they are fitted below the triple clamp.

I like the look, and the use of OEM parts !!!

 :thumb:

So they would not fit a 2003 and later LeMans with 43mm forks?

Mike
1991 Moto Guzzi LeMans 5
1977 BMW R100S

Online RinkRat II

  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • *
  • Posts: 2188
  • Lake Powell AZ
Re: Looking for V11 bar risers
« Reply #5 on: February 20, 2018, 06:25:40 PM »
  Travlr, Outside diameter  fork tube at triple clamp 2000 V11 Sport ..54mm. Ebay might help.

    Paul B
« Last Edit: February 20, 2018, 07:57:36 PM by RinkRat II »
A Miller in the hand is worth two in the fridge.

Offline Thunderbutt

  • Hatchling
  • **
  • Posts: 175
Re: Looking for V11 bar risers
« Reply #6 on: February 20, 2018, 06:36:11 PM »
You might also check out Tarrozzi bars thru Omar's or Dime City Cycles.
Tarrozzi makes serveral clip on bars in low, medium and taller heights.
Current rides: 2000 V-11 Sport-SOLD, 2003 Aprilia Mille Haga Replica #125, 1975 Triumph T160, 2002 LeMans, 2008 Norge aka the silver bullet

Online johnk

  • New Egg
  • *
  • *
  • *
  • Posts: 93
Re: Looking for V11 bar risers
« Reply #7 on: February 21, 2018, 08:51:03 AM »
I put some woodcraft clip-ons on my Scura. https://www.woodcraft-cfm.com/cgi-bin/commerce.cgi?search=action&category=CORI
I believe I used the 2 inch riser but they can make them taller. They are very well made and replacement parts are quite reasonably priced.


John Koester
2002 V11 Scura, 1982 V50 'Monza', 82 BMW R65LS, 1992 DR350S, 1971 CB350

Offline rocker59

  • Global Moderator
  • Gaggle Hero
  • *
  • *****
  • *
  • *
  • *
  • *
  • *
  • Posts: 24010
  • "diplomatico di moto"
  • Location: NW Arkansas
Re: Looking for V11 bar risers
« Reply #8 on: February 21, 2018, 10:45:47 PM »
So they would not fit a 2003 and later LeMans with 43mm forks?

Mike

They're all 43mm, aren't they?
Michael T.
Aux Arcs de Akansea
2004 California EV Touring II
"Do what you can, with what you have, where you are." - Theodore Roosevelt

Offline HB1

  • New Egg
  • *
  • Posts: 11
  • Location: Alberta, Canada
Re: Looking for V11 bar risers
« Reply #9 on: February 22, 2018, 12:57:55 PM »
I bought these Apex risers for my 2003 V11 Le Mans with 54mm dia. fork upper. Not yet installed.

http://apexmfg.com/all-products/product/view/11/173
View the video at the bottom of this page to see the degrees of freedom for adjustment.
For large changes from stock you will need longer clutch and brake lines throttle cables or rerouting the lines

A video showing adjustability:
https://www.youtube.com/watch?v=AuJi0HzJgJ8

Offline rschrum

  • Gaggle Mentor
  • ****
  • *
  • *
  • *
  • *
  • *
  • Posts: 598
Re: Looking for V11 bar risers
« Reply #10 on: February 22, 2018, 06:14:21 PM »
I was always going tom fab some for my v11 sport, but sold it. I do have the Spiegler 3" over stock brake and clutch lines, brand new if anybody needs them pm me.
15 GRISO
00 ZX12r
07 Tuono Factory
01 ZRX 1200R
19 Monster 1200R
2012 MV Agusta Brutale 1090R
08 Ducati s4rs Tricolore
22 Indian FTR Championship
Central Iowa

 

Quad Lock - The best GPS / phone mount system for your motorcycles, no damage to your cameras!!
Get a Wildguzzi discount of 10% off your order!
http://quadlock.refr.cc/luapmckeever
Advertise Here