2012 V7C rear brake

[rbond]

Need to change rear pads. Can't get the pin through the pads to come out. Not made like the front. Has a weird spring wrapping around pin, but main problem is a split roll pin around one end of the pin. There is a small 'e' clip on the other end that came off easily. Any ideas?

[TimmyTheHog]

I am going to steal Sign216's thunder by posting his flicker's photo documentary

https://www.flickr.com/photos/sign216/albums/72157633599275310

see if this helps you any.

[Kev m]

I gotta ask cause I did this once and it sounds familiar.

Are you sure you're trying to drive it out the right direction?!?

[sign216]

I am going to steal Sign216's thunder by posting his flicker's photo documentary

https://www.flickr.com/photos/sign216/albums/72157633599275310

see if this helps you any.

No problem, T-Hog. 
All, double click on the photos to get the text for each.

[rbond]

Timmythehog and sign216, thanks soooo much. The tutorial was great, did like instructed,, changed pads in a couple of minutes. Tonight I will bleed the caliper with some new fluid.