Author Topic: 883 Sportster - rear shocks  (Read 1493 times)

Offline Vince in Milwaukee

  • Gaggle Hero
  • *****
  • *
  • *
  • Posts: 3677
  • Location: Kenosha, WI
883 Sportster - rear shocks
« on: July 14, 2018, 09:44:30 AM »
Posting for a friend who happens to be a HD rider.  Along with BMW, we seem to have a lot of folks on here who also own a Harley besides a Moto Guzzi.  My friend's Sportster is a 2010 (rubber mounted) and he is in the market to upgrade the stock rear shocks.  He doesn't ride a lot, but does enjoy short jaunts out and about Milwaukee.  I mentioned Ikon, but isn't that mostly for the European stuff?  Any help, advice appreciated. 
1984 Moto Guzzi 850 LeMans III, 1986 California II
Gone but not forgotten:
1969 Moto Guzzi Ambo, 1994 BMW K75RTw/ABS, 1996 BMW R1100RT, and 1993 BMW K75

Offline yogidozer

  • Gaggle Hero
  • *****
  • Posts: 2920
Re: 883 Sportster - rear shocks
« Reply #1 on: July 14, 2018, 09:56:55 AM »
Here are some choices, rated by the users.
I would not recommend shorter than stock, if he wants a better ride quality.
https://www.jpcycles.com/2010-harley-davidson-sportster-883-iron-xl883n/shocks?Nao=0

Online Antietam Classic Cycle

  • Gaggle Hero
  • *****
  • *
  • Posts: 14141
  • Happily stuck in the past.
    • Antietam Classic Cycle
  • Location: Rohrersville, Maryland
Re: 883 Sportster - rear shocks
« Reply #2 on: July 14, 2018, 10:08:48 AM »
Ikon has applications for Harleys (and lots of others too). Same with Hagon.
Charlie

Offline Madtownguzzi

  • Gosling
  • ***
  • Posts: 394
Randy S.
98 V11 EV
05 HD Electra Glide Classic
Madison, WI

Wildguzzi.com

Re: 883 Sportster - rear shocks
« Reply #3 on: July 14, 2018, 01:32:40 PM »

Online Kev m

  • Not your normal Hombre
  • Gaggle Hero
  • *****
  • Posts: 30431
  • Yo from Medford, NJ
Re: 883 Sportster - rear shocks
« Reply #4 on: July 14, 2018, 05:03:18 PM »
Tons of choices.

I actually run Progressive 412s that are take offs from my old Jackal. I just had to change the inner bushing collar.

But there's no reason not to consider all the options mentioned already. Ikons, Hagons, take off FLH air shocks etc.

Also not sure of his model, but if it's any of the lowered models and he doesn't NEED the low seat height, he might consider slightly longer shocks for even better performance. Stock they can run up to about 13.25" long shock bodies.
Current Fleet

18 Guzzi V7III Carbon Dark
13 Guzzi V7 Stone
11 Duc M696

Offline egschade

  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • *
  • *
  • Posts: 1609
  • Eric - MGNOC NJ Rep - mgnocnj.forumotion.com
  • Location: Basking Ridge, NJ
Re: 883 Sportster - rear shocks
« Reply #5 on: July 15, 2018, 09:00:57 AM »
Tons of choices.

I actually run Progressive 412s that are take offs from my old Jackal. I just had to change the inner bushing collar.

But there's no reason not to consider all the options mentioned already. Ikons, Hagons, take off FLH air shocks etc.

Also not sure of his model, but if it's any of the lowered models and he doesn't NEED the low seat height, he might consider slightly longer shocks for even better performance. Stock they can run up to about 13.25" long shock bodies.

Kev, what did Harry put on his 883? I know they were over an inch longer and he liked the added height/travel of the longer shocks...
The elder Eric in NJ

2020 V85TT Adventure
1985 LeMans 1000
2005 BMW F650GS

Past Guzzis:
V65 SP
V7 III
V50
Griso 1200SE Tenni
Breva 1100
EV Touring

Offline earemike

  • Lurker
  • Gosling
  • ***
  • Posts: 297
    • A place for me to park on the web
  • Location: Down Under
Re: 883 Sportster - rear shocks
« Reply #6 on: July 15, 2018, 09:06:52 AM »
Fournales? Depends on what he needs.
850 T3
850 LeMans killer goose or somesutch I’m told
850 LeMans
850 LeMans II (I've butchered it by fitting a round headlight & removing the front faring.)
SP1000 Stucchi
V11 Ballabio
V7 Sport (needs a little work)

Offline mjptexas

  • Gaggle Hero
  • *****
  • Posts: 1034
Re: 883 Sportster - rear shocks
« Reply #7 on: July 15, 2018, 11:39:36 AM »
Tons of choices.

I actually run Progressive 412s that are take offs from my old Jackal. I just had to change the inner bushing collar.

But there's no reason not to consider all the options mentioned already. Ikons, Hagons, take off FLH air shocks etc.

Also not sure of his model, but if it's any of the lowered models and he doesn't NEED the low seat height, he might consider slightly longer shocks for even better performance. Stock they can run up to about 13.25" long shock bodies.

I put Progressives on my 2014 Sportster (forget the model number).  I'm with Kev on the longer shocks - makes a huge difference. IMHO Sportsters with stock shocks are unrideable (there are a few exceptions).  Prior to replacing the shocks I would brace myself prior to running over a manhole cover.

Be forewarned, replacing the shocks will exacerbate the shortcomings of the front suspension.  He should plan on replacing the fork springs while he's at it, and maybe buy a fork brace.
Mike

'18 R Nine T Urban GS
'17 Griso
'16 XL1200 Roadster
'15 Monster 821
'14 Cali Custom
'14 Vespa GTS300 Super
'15 Vespa Primavera
'75 CB400F
'76 CB550F

Online Kev m

  • Not your normal Hombre
  • Gaggle Hero
  • *****
  • Posts: 30431
  • Yo from Medford, NJ
Re: 883 Sportster - rear shocks
« Reply #8 on: July 16, 2018, 06:38:06 AM »
Kev, what did Harry put on his 883? I know they were over an inch longer and he liked the added height/travel of the longer shocks...

I don't remember, but we could probably go look it up. At the end of the day though there are plenty of solutions and I'm sure a decent shock from one aftermarket supplier will be comparable to another in the same price range found elsewhere.
Current Fleet

18 Guzzi V7III Carbon Dark
13 Guzzi V7 Stone
11 Duc M696

Offline twowheeladdict

  • Gaggle Hero
  • *****
  • Posts: 6149
Re: 883 Sportster - rear shocks
« Reply #9 on: July 16, 2018, 07:09:35 AM »
He needs to find shocks with a longer stroke than the stock crap that come on sportsters.  He should also consider shocks with rebound damping so he can dial them in for the conditions. 

Anything that has a longer stroke will be better than the stock shocks and he can go up from their based on budget.

I have only owned 3 motorcycles that I didn't feel the need to upgrade the suspension.  The Kawasaki Concours 1400, the Versys 650, and the Triumph Trophy SE.  All the other motorcycles I have owned need suspension upgrades to be rideable. 
2022 Moto Guzzi V85TT Guardia D'onore
2018 V7 III Carbon Dark #0009 of 1921
2018 Road Glide Special
2021 Kawasaki KLX300SM
2017 Suzuki Van Van 200
2009 Harley Davidson Softail Custom

Offline leafman60

  • Gaggle Hero
  • *****
  • *
  • Posts: 6795
Re: 883 Sportster - rear shocks
« Reply #10 on: July 16, 2018, 07:16:44 AM »
Ohlins

Check into them.  Several versions are now available for H-D, including Sportster models. They are not all super expensive. 

Check the Ohlins website and look at sellers such as Revzilla, Hard Racing, Pro Pilot Suspension etc etc.

Longer lengths (up to 14" +-), give more lean angle but can over-quicken the steering by reducing front trail.  More spring preload on the front may offset this.  Also, many options for the front forks.  Emulators and different oil often provide an inexpensive improvement in fork action.

You don't have to be making a serious H-D curve-carver to benefit from the quality and ride provided by Ohlins shocks on the rear.

Other options like Progressive, Works etc etc are out there and may cost less but the Ohlins shocks that I've used over the years were the best.
« Last Edit: July 16, 2018, 07:21:50 AM by leafman60 »

Online Kev m

  • Not your normal Hombre
  • Gaggle Hero
  • *****
  • Posts: 30431
  • Yo from Medford, NJ
Re: 883 Sportster - rear shocks
« Reply #11 on: July 16, 2018, 07:25:47 AM »
TwoWheel - FYI, not all stock Sportster shocks are the same length or travel. They vary by an inch or two depending on the model.

Leaf - 14"+ can be problematic on many of the rubbermounts - the 07-13 models have something on the underside that gets close to the belt with shocks that are too tall (I forget if it's part of the crossover/exhaust mounting bracket or the rear master cylinder mounting bracket). Anyway, if you go much beyond 13.5" with that component still in place you risk the belt contacting it at or near full upward extension.

Current Fleet

18 Guzzi V7III Carbon Dark
13 Guzzi V7 Stone
11 Duc M696

Lcarlson

  • Guest
Re: 883 Sportster - rear shocks
« Reply #12 on: July 16, 2018, 10:49:34 AM »
I put Progressive 412s on my 06 1200 Sportster Custom, and it was a substantial improvement. It was still a Sportster, though.

***Wildguzzi Official Logo High Quality 5 Color Window Decals Back In Stock***
Shipping in USA Only. Awesome quality. Back by popular demand. All proceeds go back into the forum.
http://www.wildguzzi.com/Products/products.htm
Advertise Here
 

***Wildguzzi Official Logo High Quality 5 Color Window Decals Back In Stock***
Shipping in USA Only. Awesome quality. Back by popular demand. All proceeds go back into the forum.
http://www.wildguzzi.com/Products/products.htm
Advertise Here