New 20 ounce tumblers available now! Forum donation credit with purchase. https://www.wildguzzi.com/Products/products.htm#Tumbler
Waltr, yes, I agree. I find myself riding with a much lighter hand
Just loaded this new map from Pete, great improvement. Cold start and throttle response is spot on, kudos to Pete, Mark and others for helping us folks that are not as keen on producing these maps and making are beloved Guzzi's run so fine. ;-TAlso, can anyone PM me info on where I could throw a few $ there way for there work.
No credit to me. I'm just the messenger. Its all Mark's doing.Pete
How certain are you on the TB balance and the rest of the tune? The buzziness and vibration sound tune related to me. Interesting.Oh, and thank you for the comprehensive feedback. It makes issues a lot easier to address.Pete
The slower throttle compensation was built in after I had complaints of 'abrupt' throttle in traffic and by some folks who cornered on a trailing throttle. I use it on all 8V maps now. If anyone prefers the old style throttle, I can fix that.4.7 or 4.8 TPS makes no difference.
The hanging return to idle (whatever that is called) seems a bit more pronounced. Maybe that was just when the motor was cold?
This seems to be a problem that affects some bikes. I haven't yet figured out what's causing it. Would you please let me know if it occurs when the engine is hot?Anybody else getting idle hangs?
I'm pretty sure it is the stepper motor. I have placed a plastic lawn mower fuel shut off valve in the line between the air box and the stepper motor (extended the line and valve to under the seat) and can confirm once the bike is warmed up I can shut the valve off and the bike perform's perfectly with zero idle hang and basically no decel burble through the exhaustAnd yes it definitely only does it when hot
The stepper is not the cause, it just does what the ecu tells it to do. That shutting it off makes a difference just tells us the stepper is opened by the ecu at some moments we don't like. All result of the conditions and parameters the ecu sees. I have it too. But I noticed the clutch switch doesn't do it's work, even when pulled. When at redlight, idle stays high, until I goto nutral. When I goto first gear then again, idle stays down.