New 20 ounce tumblers available now! Forum donation credit with purchase. https://www.wildguzzi.com/Products/products.htm#Tumbler
Crazy on the call bearing, lucky nothing else got chewed up. Looks like maybe more than one ball is missing. Was the cage the metal type or nylon?
pretty typical failure on a early 350 engine , i had two of those failures , one on a engine with just over 10.000 km. usually due to the sleeve on the crankshaft seizing, putting axial load on the ball bearing. probably the reason they fitted a plain bearing on later engines.I had good results with roller bearings on this application. you might as well check the gear selector forks , on early engines they were anodised alloy , and prone to wear.
Great haul! Really looking forward to seeing the resurrection.Why do most of the Moto Morini gauges seem to have the 'melted' needles? I haven't seen that on other Veglia gauges, did the Guzzi Veglia gauges use a better (stiffer or thicker) needle?
Really glad I contacted the previous-previous owner, Roger. In addition to the bad news ("a ball came rolling out"), he found a box of what he had assumed was Guzzi parts, but turned out to be a bunch of missing parts from the Strada!
Another order arrived, this one from Startgomma. Rubber bits: fork dust boots, battery strap and clasp, sidecover holders, clutch arm cover, kickstart lever rubber and passenger footpegs. My order from Mdina Italia is due to arrive tomorrow.
Do you have a link for this supplier? I need some of those rubber side cover bits.ThanksJim
Here you go: https://www.startgomma.com/moto-morini
Nice to have reliable resources on the Morini… Good deal.
If your wire harness components needs rebuilding the black hard plastic wire terminal covers are available from Bevel Heaven, the soft plastic clear new type do not fit well into the CEV fuse box or terminal block.https://store.bevelheaven.com/Electrical-Battery-Ignition/Spade-Terminal-Sleeve-Rigid/
I like your disciplined sorting. I need to learn that.What are you going to do about the exhaust headers? New ones or have them re-cromed?
Page created in 0.024 seconds with 20 queries.