New 20 ounce tumblers available now! Forum donation credit with purchase. https://www.wildguzzi.com/Products/products.htm#Tumbler
I got married and there's a baby girl coming in October,
Rick4003Your buddy has a Montreal?Filth
Your "new" bike looks very good by the way
Congrats. Oh, that won't change your life. You'll still have *plenty* of time for all these projects..
Yeah That's what I been telling everyone! It won't change a thing, I will still be having lots of time on my hands -Ulrik
Ulrik - Don't worry, it will not be permanent. I got four kids, 3, 7, 9 and 11yrs.... and I still have time for my Guzzi. I even get commanded to take a ride some times when I've been too grumpy, but I'm also very well married (ps. my wife is reading over my shoulder)
Lovely job Rick....you are aware that the moto-spezial hydraulic clutch isn't compatible with brake fluid? maybe that's the problem...they insist on Glysantin( german-can't remember what that is in English !) being the onl suitable fluid to avoid their seals perishing.
I got married and there's a baby girl coming in October, so I don't expect to have a lot of chances to work on the bike :-)Sent from my SM-A520F using Tapatalk
Ulrik, Curious as to what jetting you used on your PHF36 carbs, if you recall? Thanks!Aldo
Hey Rick, what happened to this project? Guess you are more concerned about changing diapers and get some sleep than working on your italian mistress ;-)
Hi AldoI run PHF36's on my SP1000 and have fiddled a while with jetting. I ended up running 136 mains' AR268 Atomizers, K18 Needle in lowest position (Clip at top) and 70 pilot jets. With this combo the idle mixture screw is ~1 3/4 out and there is absolutely no popping and it pulls even up to 7500I found part of my problem was improper float setting and did a readjustment according to this instruction (left picture) https://www.ducatimeccanica.com/float_levels.html
Hi Aldo,Honestly I can't remember. I have to install some bigger idle jets as it is popping on stable throttle openings less than 1/8 open. At bigger throttle openings it runs pretty well for now, but I have to get some more time on it to get it jetted properly.When I do get back on the project I'll post the settings. But don't hold your breath. It won't be any time soon.-Ulrik Sent from my SM-A520F using Tapatalk
Great taste in motorcycles and cars!