General Category > General Discussion
Front brake mc size
John A:
I’m going to put on another disc on Deb’s 02Stone because I’ve now gotten all the parts I need. What size master cylinder do I use for a double disc non linked system? I have that info at the shop and I’ll read over it but what experiences did you have with it?
RinkRat II:
Here's some good info for what your doing. Fun With Numbers!
http://ducatimeccanica.com/brake_ratios.html
Good Luck
Paul B :boozing:
moto:
Another good source is Guzziology. You'll need to know the sizes of both your master and slave cylinders to get started.
John Croucher:
Here are a couple of pictures on brake line routing I used to clean up appearance.
Bike originally had linked brakes.
The right size m.c. will give you two finger braking. To small and you will have a soft lever, to big and the lever will be hard with little braking. Just guessing, I think I used a 14mm. on the front by Brembo.
moto-uno:
I might suggest you simply try it with what you have ( it may be fine , different , but fine) ! Peter
Navigation
[0] Message Index
[#] Next page
Go to full version