Author Topic: Sticky tool handles  (Read 690 times)

Offline rtbickel

  • Gaggle Mentor
  • ****
  • Posts: 874
  • Location: Dallas
Sticky tool handles
« on: September 18, 2022, 01:15:03 PM »
Anyone know of a fix for tolls that have been unused and sitting in an uncooled/unheated garage for a couple of years (in this case a heat gun and a couple of screwdrivers) where the handles or casings have become sticky and leave a residue the color of the plastic all over your hands?
2020 V85TT
2002 California Special Sport - The Black Widow
2014 California Touring - Stealth (Gone but not forgotten)

Offline berniebee

  • 2020 Board Donor
  • Gaggle Mentor
  • *
  • *
  • *
  • *
  • Posts: 570
  • Location: Ottawa, Canada
Re: Sticky tool handles
« Reply #1 on: September 18, 2022, 01:31:48 PM »
Are you sure it's the heat? No way it's the cold. (Hey, I'm from Ottawa, I know cold!  :grin:)   Is there possibly an open solvent container in your garage and the fumes are attacking the plastic?

Offline rtbickel

  • Gaggle Mentor
  • ****
  • Posts: 874
  • Location: Dallas
Re: Sticky tool handles
« Reply #2 on: September 18, 2022, 01:43:55 PM »
No solvents nearby - heat gun in its case in a cabinet and screwdrivers in a drawer in the too0lbox
2020 V85TT
2002 California Special Sport - The Black Widow
2014 California Touring - Stealth (Gone but not forgotten)

Offline LowRyter

  • Gaggle Hero
  • *****
  • *
  • *
  • Posts: 16685
  • Location: Edmond OK
Re: Sticky tool handles
« Reply #3 on: September 18, 2022, 01:48:10 PM »
Clean it with WD40 and Awesome?  Or just get some new screwdrivers?
John L 
When life gets you down remember it's one down and the rest are up.  (1-N-23456)

Wildguzzi.com

Re: Sticky tool handles
« Reply #3 on: September 18, 2022, 01:48:10 PM »

Offline normzone

  • Gaggle Hero
  • *****
  • Posts: 3077
  • '72 Eldo - 1980 to 1990 - '99 Bassa 2014 - 2023
  • Location: San Diego CA
Re: Sticky tool handles
« Reply #4 on: September 18, 2022, 01:51:21 PM »
Many plastics begin their life as oil, and some of them want to return to that state.

Some plastics more so than others, and probably environmental factors encourage or discourage that. If solvents and UV light are not factors, then I'm out of psuedo wisdom to dispense, but I've experienced the same problem before. It doesn't seem to be universal, but more batch based.
That's the combustion chamber of the turbo shaft. It is supposed to be on fire. You just don't usually see it but the case and fairing fell off.

Offline Craig in Alabama

  • Hatchling
  • **
  • *
  • *
  • *
  • *
  • *
  • Posts: 118
  • Location: Madison, AL
Re: Sticky tool handles
« Reply #5 on: September 18, 2022, 02:10:03 PM »
I've successfully de-stickied things like remote controls by wiping them down with a rubbing alcohol soaked cloth.
Might work with your tools.

Cheers!
Craig
22 V85TT Travel
98 V11EV
05 Suzuki DL-650

Offline Kiwi_Roy

  • Gaggle Hero
  • *****
  • Posts: 9796
  • Location: New Westminster BC
Re: Sticky tool handles
« Reply #6 on: September 18, 2022, 02:11:49 PM »
Try taking a tablespoon of flour in your hand and work it into the sticky mess it may be enough to neutralize the stickiness
72 Eldorado
17 V7iii Special
76 Convert
Half a V9 Roamer

Moto Guzzi - making electricians out of riders since March 15 1921

Offline pressureangle

  • Gaggle Mentor
  • ****
  • *
  • *
  • *
  • *
  • *
  • Posts: 972
  • '97 1100 Sport i, '89 Mille GT
Re: Sticky tool handles
« Reply #7 on: September 18, 2022, 02:14:44 PM »
I use 3M adhesive remover if they're that bad. Sometimes it leaves them hard, sometimes it returns them to supple and mostly smooth. There's no good answer to this, the steering wheel restoration people consider this a holy grail.
Something wistful and amusing, yet poignant.

Offline Dirk_S

  • www.dirkshearer.com
  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • *
  • Posts: 1506
  • Doodler of doodles
    • www.DirkShearer.com
  • Location: Portland, Maine, U.S.
Re: Sticky tool handles
« Reply #8 on: September 18, 2022, 04:01:12 PM »
Maybe PlastiDip ‘em?
Current: ‘16 Guzzi V7 II Stone, ‘78 BMW R80/7

Previous: ‘15 Ural Gear Up, ‘77 Kawasaki KZ400 Special, ‘78 Honda CX500S, ‘80 Honda CX500D, ‘11 Suzuki TU250X

Offline Rich A

  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • Posts: 3151
Re: Sticky tool handles
« Reply #9 on: September 18, 2022, 05:10:28 PM »
Depending on the size, you might try some heat shrink tubing (that does come in large sizes).

Rich A

Offline billgilbert

  • New Egg
  • *
  • *
  • *
  • *
  • *
  • Posts: 37
Re: Sticky tool handles
« Reply #10 on: September 19, 2022, 12:33:16 PM »
I like the flour idea except that something will probably decide to eat it, like mold/mildew. I would use something talc based , especially if you can get an unmedicated talc powder. I have rollers on my kayak rack that got gummy, used white gas carefully outdoors, (aka naptha, Coleman fuel,) and lotsa rags to remove a layer of goo. Wore exam gloves for that.

Offline Don G

  • Gaggle Hero
  • *****
  • Posts: 1038
  • Location: Smiley, Saskatchewan Canada
Re: Sticky tool handles
« Reply #11 on: September 19, 2022, 01:56:19 PM »
A shot of Brake Clean on a rag, give them a quick wipe.  DonG

Offline rtbickel

  • Gaggle Mentor
  • ****
  • Posts: 874
  • Location: Dallas
Re: Sticky tool handles
« Reply #12 on: September 19, 2022, 02:44:52 PM »
Thanks for all of the responses, I guess I will start at the top and keep going until something works.  Got alcohol swabs, goo-gone and Coleman fuel
2020 V85TT
2002 California Special Sport - The Black Widow
2014 California Touring - Stealth (Gone but not forgotten)

Offline TOMB

  • Gaggle Hero
  • *****
  • Posts: 1470
  • Location: Newington Ct. 06111
Re: Sticky tool handles
« Reply #13 on: September 19, 2022, 03:00:16 PM »
I'm in the same condition and situation trying to unstick The Edge molding on a Vetter fairing.I've had some success with Goo Gone paint thinner WD-40 rubbing alcohol simple green purple Power but I'm still looking for the one that will take me to the final step so it's not sticky at all on the Vetter it's the side molding that runs down each side has Chrome strip in it my other Vetter doesn't have the problems this bike was an Eldorado that I pulled out of a garage and trying to get it resurrect to get it back on the road so it's sst in let's just say various circumstances in a shed any suggestions would be greatly appreciated.

TOMB
« Last Edit: September 19, 2022, 03:28:00 PM by TOMB »
TOMB

CENTRAL CONNECTICUT
1972 Eldorado new to me so "0" miles so far
1972 AMBASSADOR 169000 MILES
1978 G5 170000 MILES
1973 V7 SPORT 25000 MILES
1973 ELDORADO 300000+ MILES
1980 CX100 50 MILES
1976 CONVERT-62000 MILES AND BUILDING
1976 HONDA CB400F 27 MILES AND BUILDING SOLD

MGNOC # 2723

Offline Mike Craven

  • Gosling
  • ***
  • *
  • *
  • *
  • Posts: 256
Re: Sticky tool handles
« Reply #14 on: September 19, 2022, 03:06:25 PM »
Are they a rubberoid type finish for grippiness?  Look up Ferrari sticky control button issue for ideas.  (Why I don't buy Ferraris.)
Mike  L-715, Atlanta GA
1983 Cali II

Offline V7Record

  • Hatchling
  • **
  • *
  • *
  • *
  • Posts: 173
Re: Sticky tool handles
« Reply #15 on: September 19, 2022, 04:49:48 PM »
I just had a spotting scope that went sticky.  It had the rubberized finish and my google search of the problem with binoculars led me to use rubbing alcohol.  It was messy and took a few paper towels and rubber gloves but I got it clean after an hour or so.  It pretty much removed the rubberizing and left the hard plastic base material.  At least it's usable now.

Offline sidecarnutz

  • Gaggle Mentor
  • ****
  • *
  • Posts: 978
  • Location: SE Virginia
Re: Sticky tool handles
« Reply #16 on: September 21, 2022, 12:56:13 PM »
A tall can of tool handle Plasti Dip. The handles have broken down chemically. Lots of cheap plastics these days "recycle" themselves, unfortunately.

Dip, hang to dry overnight and then do it again a day later. That liquid vinyl will cure over top the surface and feel much better. I've use dthat stuff ro twenty years. A double dip holds up very well!
yeah, I might be addicted to brake fluid. But I can stop any time I want.

2002 Kawasaki ZR7S
2021 Royal Enfield 650 Conti GT

***Wildguzzi Official Logo High Quality 5 Color Window Decals Back In Stock***
Shipping in USA Only. Awesome quality. Back by popular demand. All proceeds go back into the forum.
http://www.wildguzzi.com/Products/products.htm
Advertise Here
 

20 Ounce Stainless Steel Double Insulated Tumbler
Buy a quality tumbler and support the forum at the same time!
Better than a YETI! BPA and Lead free.
Advertise Here