New 20 ounce tumblers available now! Forum donation credit with purchase. https://www.wildguzzi.com/Products/products.htm#Tumbler
Oddly enough I was going to get the fancy plugs @ $20+ each but some research showed they are only good for longevity and old school copper core might still be the go to plug for the best conduction.When I mentioned this to the guy at the store he mentioned being at the drag strip and that is what they were putting in a 'Top Fueller to his surprise.If they are good enough for top fuel they should be OK in the Eldorado.The distributor was in good condition so only got a light clean up on the pad for the securing bolt.I will machine a shim to reduce the shaft end float.
I had forgotten the seat, why does it have UNC threads and the studs are spaced imperially and not even close to that on the frame.When I got the bike it has washers on the inside of the front lugs which were then bent inward when some DPO cranked the bolt up.They are an odd seat, the rear is down and the nose points up with the two mounts hitting the side cover brackets.
If the rear of the seat is down hard the studs bend outwards, the thread is already sad on the inside side from rubbing on the frame as I got it........ I will see how it goes.I suppose I could start looking at batteries and what to get.... I got oil today and will fill and prime the engine.
I got some NOS late push rods off ScoutKB (the famous guy) not only did he charge me only $22 international post (that local order was $14) but he has or had a Sunbeam S7 Deluxe so must be alright.Just pretend there is a push rod picture here.