Author Topic: GuzziDiag HowTo - A tutorial for beginners  (Read 554100 times)

beetle

  • Guest
GuzziDiag HowTo - A tutorial for beginners
« on: April 26, 2014, 05:04:54 AM »
.
« Last Edit: November 18, 2017, 05:02:51 PM by beetle »

Offline Chuck in Indiana

  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • Posts: 29445
Re: GuzziDiag HowTo - A tutorial for beginners
« Reply #1 on: April 26, 2014, 06:09:31 AM »
*Very* nice.  ;-T Thanks for taking the time to do this..
Chuck in (Elwood) Indiana/sometimes SoCal
 
87 AeroLario
95 Skorpion tour
22 Royal Enfield Classic 3 fiddy
 "Two things are infinite: the universe and human stupidity; and I'm not sure about the universe."
Albert Einstein

Offline Dean Rose

  • Gaggle Hero
  • *****
  • Posts: 12224
    • Twin Valley Riders
  • Location: Claytor Lake Virginia
Re: GuzziDiag HowTo - A tutorial for beginners
« Reply #2 on: April 26, 2014, 06:19:13 AM »
Maybe pin this to the top.

Dean
Magnolia '02 EV
Sophia '06 Breva 1100 
"Never attribute to malice that which is adequately explained by stupidity."

Offline bratman2

  • Gosling
  • ***
  • Posts: 493
Re: GuzziDiag HowTo - A tutorial for beginners
« Reply #3 on: April 26, 2014, 08:43:59 AM »
Another thanks. I have struggled as one program would not open on my newer laptop. Also I could guess what each thing does, I did not know exactly how it worked. Tried to download Adobe reader and it has failed three times to load. I read it would open the single program I could not get open. Already fussed and cussed up a storm. Will try and get it all downloaded again later today. Get one of my genius daughters to get it up and running. Luckily when it came to brains they got it from their mom!!!

5AM GuzziDiag One_Lambda V1.27        What program do you use to open this? Please don't say Adobe reader.

« Last Edit: April 26, 2014, 09:11:13 AM by bratman2 »
Glenn Taylor
09 Norge with Staintune and Rexxer reflash
87 Subaru Brat (owned since 97)

Wildguzzi.com

Re: GuzziDiag HowTo - A tutorial for beginners
« Reply #3 on: April 26, 2014, 08:43:59 AM »

Offline pauldaytona

  • Gaggle Hero
  • *****
  • Posts: 2562
    • Paul's fast Guzzi Page
Re: GuzziDiag HowTo - A tutorial for beginners
« Reply #4 on: April 26, 2014, 10:12:19 AM »
5AM GuzziDiag One_Lambda V1.27        What program do you use to open this? Please don't say Adobe reader.

That one, as the others ending with xdf, are definitions from the layout of a map. So this one belongs to the one lambda 5am ecu. You use it with tunerpro to look at your map, if you download it from the bike. And you can modify anything you want. Download for tunerpro is linked on the guzzidiag website.
How to use it is in this youtube:

https://www.youtube.com/watch?feature=player_embedded&v=NrTlLpkGUDI
Paul

Daytona 1225, Stelvio 1151





Download Guzzidiag here: http://www.von-der-salierburg.de/download/GuzziDiag/

Offline leafman60

  • Gaggle Hero
  • *****
  • *
  • Posts: 6795
Re: GuzziDiag HowTo - A tutorial for beginners
« Reply #5 on: April 26, 2014, 10:18:50 AM »
Fabulous effort, Beetle.  Thank you.

Offline Dick

  • Gaggle Hero
  • *****
  • Posts: 1192
Re: GuzziDiag HowTo - A tutorial for beginners
« Reply #6 on: April 26, 2014, 10:47:19 AM »
Excellent!! Makes me want a bike I could use it on. Great effort by all who have put this together. ;-T
« Last Edit: April 26, 2014, 10:50:16 AM by Dick »

Offline dawdish

  • Gosling
  • ***
  • Posts: 456
  • Lifes Better with bugs in your teeth
  • Location: Colorado
Re: GuzziDiag HowTo - A tutorial for beginners
« Reply #7 on: April 26, 2014, 04:05:45 PM »
I'm picking up my 02 Lemans next week and I understand it has a PC3 installed. My question is, does this year model utilize the Guzzi Diag, and would it do me any good to have it?   Dave
'81 G5 Cafe
'16 Eldorado
'76 T3 V1000

dddd

  • Guest
Re: GuzziDiag HowTo - A tutorial for beginners
« Reply #8 on: April 26, 2014, 04:46:49 PM »
Once again a big thanks for putting in the time and effort to simplify a confusing (for idiots such as me) issue like this and make it idiot proof.

Could someone please pin this at the top

Offline pauldaytona

  • Gaggle Hero
  • *****
  • Posts: 2562
    • Paul's fast Guzzi Page
Re: GuzziDiag HowTo - A tutorial for beginners
« Reply #9 on: April 26, 2014, 04:55:06 PM »
I'm picking up my 02 Lemans next week and I understand it has a PC3 installed. My question is, does this year model utilize the Guzzi Diag, and would it do me any good to have it?   Dave

Yes any injected Guzzi does. And a v11 can the map be changed too.
Paul

Daytona 1225, Stelvio 1151





Download Guzzidiag here: http://www.von-der-salierburg.de/download/GuzziDiag/

Offline dawdish

  • Gosling
  • ***
  • Posts: 456
  • Lifes Better with bugs in your teeth
  • Location: Colorado
Re: GuzziDiag HowTo - A tutorial for beginners
« Reply #10 on: April 26, 2014, 04:59:38 PM »
Yes any injected Guzzi does. And a v11 can the map be changed too.

Thanks I thought so.....Dave
'81 G5 Cafe
'16 Eldorado
'76 T3 V1000

Offline Mayor_of_BBQ

  • Instagram: @Mayor_of_BBQ
  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • Posts: 3618
  • 'Ever thus to deadbeats, Lebowski'
  • Location: Asheville, NC
Re: GuzziDiag HowTo - A tutorial for beginners
« Reply #11 on: April 27, 2014, 01:00:44 AM »
Oh I could kiss you sir



Sent from my iPhone using Tapatalk
Chad (Shadrach) in Asheville NC
1979 LeMans CX-100 (battle axe)
2007 Breva 1100 (Sport 1200 tribute)

Vasco DG

  • Guest
Re: GuzziDiag HowTo - A tutorial for beginners
« Reply #12 on: April 27, 2014, 02:26:15 AM »
Oooh. You wouldn't want to do that. Believe me.

Pete

ajonen

  • Guest
Re: GuzziDiag HowTo - A tutorial for beginners
« Reply #13 on: April 27, 2014, 09:47:45 PM »
Bravo!  Thanks for this.  you have covered reading, writing, resetting tps.  Post a bitcoin public address and i will send ya some coin. :) 
Yes yes, i cant wait to hear the feedback on this.  :)

Offline Gerry

  • Hatchling
  • **
  • Posts: 176
Re: GuzziDiag HowTo - A tutorial for beginners
« Reply #14 on: April 28, 2014, 08:22:14 AM »
Well Done!
Thanks for the effort Beetle.  The chapter on CO trim was lost on me til I read your instructions.
Gerry
2007 Ducati GT1000 Red
2008 Norge 1200 GT Black
1984 Moto Guzzi V65c
1972 Triumph Bonneville
2023 Triumph Trident 660
"Red hair and black leather, my favorite color scheme"
Richard Thompson

Offline rboe

  • Gaggle Hero
  • *****
  • Posts: 5086
Re: GuzziDiag HowTo - A tutorial for beginners
« Reply #15 on: April 28, 2014, 09:17:56 AM »
Full marks sir(s).  :bow

I know enough about computers to get confused at times.  :P This is a huge help.
Phoenix, AZ
2000 Quota 1100 ES Black (sold & gone)
2008 Honda XR650L
2012 Griso SE
2013 Honda CB1100

Offline smdl

  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • *
  • *
  • Posts: 1321
  • Location: Courtenay, BC
Re: GuzziDiag HowTo - A tutorial for beginners
« Reply #16 on: April 30, 2014, 10:48:52 AM »
Yes any injected Guzzi does. And a v11 can the map be changed too.

Great tutorial!  With regard to the V11, is it possible to reset the TPS with Guzzidiag?  I seem to recall reading that this can only be done electronically on the 5AM bikes?

Thanks,
Shaun
'74 Eldorado Civilian
'17 V7 III Stone
'21 Aprilia Tuono 660
'22 V85TT Guardia D'Onore
'22 V85TT Guardia D'Onore (Yep, two)

Offline Chuck in Indiana

  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • Posts: 29445
Re: GuzziDiag HowTo - A tutorial for beginners
« Reply #17 on: April 30, 2014, 11:04:58 AM »
Great tutorial!  With regard to the V11, is it possible to reset the TPS with Guzzidiag?  I seem to recall reading that this can only be done electronically on the 5AM bikes?

Thanks,
Shaun

The TPS is set mechanically. You can use Guzzidiag to set the idle voltage.
Chuck in (Elwood) Indiana/sometimes SoCal
 
87 AeroLario
95 Skorpion tour
22 Royal Enfield Classic 3 fiddy
 "Two things are infinite: the universe and human stupidity; and I'm not sure about the universe."
Albert Einstein

Offline pauldaytona

  • Gaggle Hero
  • *****
  • Posts: 2562
    • Paul's fast Guzzi Page
Re: GuzziDiag HowTo - A tutorial for beginners
« Reply #18 on: April 30, 2014, 02:24:48 PM »
The TPS is set mechanically. You can use Guzzidiag to set the idle voltage.

You should be carefull by usingGuzzidiag for low voltage, it it more a sort indication. The digital increments are way to big to be usefull to do something like a 150mv adjust. It's not more precise from what the ecu uses.

And next to the 5am, the 15rc on Breva 750 can be reset. And so is the bellagio where the tps should never be set with guzzidiag, that is a strange thing, a bastard between a cali 1100 and a calc.
Paul

Daytona 1225, Stelvio 1151





Download Guzzidiag here: http://www.von-der-salierburg.de/download/GuzziDiag/

Offline Suncoast

  • Gosling
  • ***
  • Posts: 270
Re: GuzziDiag HowTo - A tutorial for beginners
« Reply #19 on: May 04, 2014, 09:25:16 PM »
Thanks again for all your work this is awesome!!
Current rides: '01 KLR 650 (winter Bike)
                    '07 Breva 1100 L'altra donna (summer bike)

cali

  • Guest
Re: GuzziDiag HowTo - A tutorial for beginners
« Reply #20 on: May 05, 2014, 03:31:21 AM »
does it work with a power commander?

Offline molly

  • Gaggle Hero
  • *****
  • Posts: 1320
Re: GuzziDiag HowTo - A tutorial for beginners
« Reply #21 on: May 05, 2014, 04:31:23 AM »
Guzzidiag will set the TPS and run diagnostics etc. whether a Power commander is fitted or not. It will not communicate with a Power commander directly but you could still alter various parts of the engine map such as ignition timing and still leave the Power commander in place to control the fueling. I'm not sure it would be a good idea though far better to input the PC data directly into the ecu and then do away with it.
Dave

Lincolnshire, U.K.

Griso 1100

Offline Dean Rose

  • Gaggle Hero
  • *****
  • Posts: 12224
    • Twin Valley Riders
  • Location: Claytor Lake Virginia
Re: GuzziDiag HowTo - A tutorial for beginners
« Reply #22 on: May 07, 2014, 07:49:33 AM »
OK, got the cables yesterday and have download all files Ithink I need for GuzziDiag. Now the question is how do I find the correct maps for a 2002 EV with an H pipe? And a map for a stock 2006 1100 Breva?   I guess I need to buy a plug for the O2 sensor on the Breva.


Dean
Magnolia '02 EV
Sophia '06 Breva 1100 
"Never attribute to malice that which is adequately explained by stupidity."

Offline Wayne Orwig

  • Gaggle Hero
  • *****
  • Posts: 13908
    • Hog Mountain weather
  • Location: Hog Mountain
Re: GuzziDiag HowTo - A tutorial for beginners
« Reply #23 on: May 07, 2014, 08:21:59 AM »
OK, got the cables yesterday and have download all files Ithink I need for GuzziDiag. Now the question is how do I find the correct maps for a 2002 EV with an H pipe? And a map for a stock 2006 1100 Breva?   I guess I need to buy a plug for the O2 sensor on the Breva.


2002 EV. Is that the P8 (large ECU under the seat)?
The P8 has a rom that you need to burn.

Even if it is the 15M, you need to use the reader software to read your rom. Then you modify your rom map, and write it back.
You might find someone with a map to share, but you really need to read and back up your rom first.

Scientist have discovered that people will believe anything, if you first say "Scientists have discovered...."

Offline dlapierre

  • Gosling
  • ***
  • Posts: 231
    • Habitat Farm
Re: GuzziDiag HowTo - A tutorial for beginners
« Reply #24 on: May 19, 2014, 07:33:28 PM »
I need some guidance.
I guess I got a little spoiled with the 1200 sport having only to press a reset button to correct the tps.
I've added an 08' California Vintage to the fleet and finally got the GuzzieDiag all hooked up and running right.
Here is what it told me after I adjusted the throttle balance and the voltage to 480mv.
At idle:
CO trim -120
rpm 1277 (yes, the tach lied to me just as forewarned)
throttle 4.87 degrees
Ignition advance 10.5 degrees
tps 39
Lambda 40 mv

The bike has lots of spunk, but at idle when warm, it hesitates often. It didn't hesitate as often when the voltage was at just a bit better than 400mv.

It's like it is searching for the right air/fuel mix to idle right.

I followed Wayne Orwig's suggestion to ignore the baseline reset to 150mv because I had this diagnostic tool called GuzziDiag.

What should I do next?

Offline pauldaytona

  • Gaggle Hero
  • *****
  • Posts: 2562
    • Paul's fast Guzzi Page
Re: GuzziDiag HowTo - A tutorial for beginners
« Reply #25 on: May 20, 2014, 02:00:38 PM »
Dean start over and do it like the book tells you. The diagnostic is can do it's work when some hardware base settings are correct. The 150 mv should be measured with a voltmeter, in that range the resolution of the ecu isn't good enough. And when doing that it should completely closed.

 And for maps, start with reading what map you have in the left bottom corner in Guzzidiag. Then I can tell you is there is someting better
« Last Edit: May 20, 2014, 02:02:28 PM by pauldaytona »
Paul

Daytona 1225, Stelvio 1151





Download Guzzidiag here: http://www.von-der-salierburg.de/download/GuzziDiag/

Offline raul

  • Gosling
  • ***
  • Posts: 226
  • Location: Missouri
Re: GuzziDiag HowTo - A tutorial for beginners
« Reply #26 on: May 29, 2014, 12:32:18 PM »
I"m getting a installation failure message when I try to install drivers for the cable.  I'm on a new Toshiba running windows 8.1.  I'm trying to hook up to a V7 Stone.  How do you tell if the cable is the right one?

Offline Dean Rose

  • Gaggle Hero
  • *****
  • Posts: 12224
    • Twin Valley Riders
  • Location: Claytor Lake Virginia
Re: GuzziDiag HowTo - A tutorial for beginners
« Reply #27 on: May 29, 2014, 01:49:32 PM »
Dean start over and do it like the book tells you. The diagnostic is can do it's work when some hardware base settings are correct. The 150 mv should be measured with a voltmeter, in that range the resolution of the ecu isn't good enough. And when doing that it should completely closed.

 And for maps, start with reading what map you have in the left bottom corner in Guzzidiag. Then I can tell you is there is someting better


Paul,

I've got everything here to use the GuzziDiag, Laptop the two cables an have downloaded the software.

We are in the process of packing our belongings to move into a new house we are having built on our property up at the lake.

When everything settles back down I'll try the GuzziDiag on my 2006 Breva 1100 and my 2002 EV. I'll get back to you after I have saved the maps on these bikes. Then maybe you can advise me on the adjustments.

Thanks,

Dean
Magnolia '02 EV
Sophia '06 Breva 1100 
"Never attribute to malice that which is adequately explained by stupidity."

Offline raul

  • Gosling
  • ***
  • Posts: 226
  • Location: Missouri
Re: GuzziDiag HowTo - A tutorial for beginners
« Reply #28 on: May 29, 2014, 04:53:31 PM »
I opened my cable and found I have the wrong cable.  Time to reorder.   ::(

Online scra99tch

  • Gaggle Hero
  • *****
  • Posts: 1019
Re: GuzziDiag HowTo - A tutorial for beginners
« Reply #29 on: May 29, 2014, 10:35:53 PM »
Beetle, Paul,

Quick Question I have gone from +20 on CO trim to -30 on CO trim and have noticed nothing in terms of a rough idle.  There is a quick change in RPM when I hit finish/save on the CO trim page.  The only other side effect I believe I have noticed is a hiccup when starting off idle. 

Can this be corrected by enriching my TPS a little more?  My manual says for the Quota 1.4 +/- .3 degrees but Guzziology says 2.1 degrees.  I am thinking by what Beetle is saying that maybe I could get CO down quite a bit and still maintain the correct idle but cure the hiccup with a little higher voltage per Guzziology.  I'll try it tomorrow, next step is to actually get to a place with a CO meter and set it to Factory specs.

Thanks


2000 Quota 1100ES
1974 Eldorado
2007 California Vintage

***Wildguzzi Official Logo High Quality 5 Color Window Decals Back In Stock***
Shipping in USA Only. Awesome quality. Back by popular demand. All proceeds go back into the forum.
http://www.wildguzzi.com/Products/products.htm
Advertise Here
 

Quad Lock - The best GPS / phone mount system for your motorcycles, no damage to your cameras!!
Get a Wildguzzi discount of 10% off your order!
http://quadlock.refr.cc/luapmckeever
Advertise Here