New 20 ounce tumblers available now! Forum donation credit with purchase. https://www.wildguzzi.com/Products/products.htm#Tumbler
850T5 and SP II's use 38mm.T5 ones do not have that little "eye" on the top one for instrument mounts. Not sure re SPII ones. They actually may be the same as the T5 ones.I think the ones in the photo are the SP II ones... which makes the above comment wrong...
Well, shoot! If the T5/SPII will fit, that would make my life a WHOLE lot easier! Any idea if the stem size is the same as the Convert?
Don't know... but fork spacing is another aspect. I think mine are 195mm.
Can the 35 mm triple clamps be safely bored out to 38 mm?
Someone posted the thread size and pitch of the stem recently so you could add more thread and cut down the stem to match the length you need. Have also heard of others pressing out the old stem and pressing in a new one...
It sounds as though I would need to find a set of later 38mm T5 clamps that have the same 195mm fork spacing, and the two little nubbins for mounting the instrument/fairing. Does such a unicorn exist?
I have a set of the 40mm forks from an sp3 (I think) with the fork spacing at 195mm. Will that work for you?Harry
Page created in 0.025 seconds with 19 queries.