V9 Roamer Rear Pegs

[tris]

I run a solo seat on my V9 Roamer and keep looking at the rear pegs that wont be used

Is there any reason (possibly structural?) why I couldn't take them off

I can't think of/see one but I thought I'd check with the mighty WG wisdom pool first

Cheers

Tris

[Kev m]

The Bobber Sport doesn't use those brackets so my initial guess would be they are not structural other than for the passenger's feet.

Am I right that only the top end of the brackets area bolted to the frame? Any the bottom end just hangs free?

If so you're good.

[tris]

Correct Kev

There are 2 bosses welded to the frame each side that the legs of the rear pegs bolt too and then hang free

I'm 99% sure I'm over thinking it but wanted a second opinion

Cheers

[bad Chad]

Go ahead and take them off, they are not structural.  I took mine off to install the Givi rack.  I put them back on as on occasion I put somebody on back, just two hex head bolts and they pop right off.

And Roamers are cool with a capital C!

[Zenermaniac]

I saw somewhere where someone took the rear pegs and mounted them on the front frame where the two bolts are and made highway pegs.