New 20 ounce tumblers available now! Forum donation credit with purchase. https://www.wildguzzi.com/Products/products.htm#Tumbler
On brakes, I have a few busted off bleed nipples. first plan is trying a reverse or LEFT HANDED drill bit, thoughts?
Broke off bleeder nipples- find a small torx bit in your tool chest. Find a drill bit in a size slightly smaller than the measured OD of the bit. Drill a hole in the bleeder. Tap in torx bit. Turn the bleeder out.
I recently had mine powder coated along with the disc carriers.
Blackcat - those look great! Mine are at the powder coater now. What color did you use?Thanks,Shawn
BradIf you want to try a bead blaster, I have one big enough, in my heated garage, in BloomingtonPM me if interestedRich
sounded like the best idea... but... I got the torx in nice and deep but when I went to turn it, SNAP! so now my worst fear is for real.. I need a replacement just the inside half of the left front caliper, anyone?the other caliper is fine tho I have not freed the pucks yet.
I went years with broken bleeders. I bled from the feed banjo when I needed to and considered it a minor inconvenience. They have banjo nuts now with bleeders in them too, if all you're trying for is bleeding. If they need to be technically correct, then Charlie + a service kit is your best answer. Or new they're not too expensive. Check MG Cycle.