Author Topic: Does anyone know part number for the petcock rebuild gasket?  (Read 346 times)

Offline NCAmother

  • Gaggle Mentor
  • ****
  • Posts: 842
    • NathanAppel (NSFW)
Does anyone know part number for the petcock rebuild gasket?
« on: January 31, 2023, 09:28:44 PM »
I have a v65 tank with 16mm x 1mm petcocks, does anyone have the part number for the rebuild gasket?  Thanks 🙏

Offline Antietam Classic Cycle

  • Gaggle Hero
  • *****
  • *
  • Posts: 14141
  • Happily stuck in the past.
    • Antietam Classic Cycle
  • Location: Rohrersville, Maryland
Re: Does anyone know part number for the petcock rebuild gasket?
« Reply #1 on: January 31, 2023, 10:00:08 PM »
I don't know that there is a part number. Perhaps it's one of these?
https://www.harpermoto.com/moto-guzzi-parts/fuel-and-intake/petcocks-and-repair-parts/
Charlie

Online jrt

  • Gaggle Mentor
  • ****
  • *
  • *
  • *
  • Posts: 997
Re: Does anyone know part number for the petcock rebuild gasket?
« Reply #2 on: January 31, 2023, 10:28:26 PM »
I'll have to look it up, but there is someone here that had gnomes manufacture the gaskets- at least for loop frame petcocks.  Name escapes me at the moment, but a really good fellow to deal with. 
Yes, gnomes, that's not a typo.  Damn good ones too.
L-720
1973 Eldorado
2003 Yardbird (1100 hydro)
2020 R1250RS

Offline bigbikerrick

  • Gaggle Hero
  • *****
  • Posts: 5848
  • 73 Eldo, 98 V 11 ,12 Ural Gear Up, 76 Convert,
  • Location: Southeastern corner of Arizona, right next to "Old Mexico, and New Mexico"
Re: Does anyone know part number for the petcock rebuild gasket?
« Reply #3 on: February 01, 2023, 02:36:48 AM »
I'll have to look it up, but there is someone here that had gnomes manufacture the gaskets- at least for loop frame petcocks.  Name escapes me at the moment, but a really good fellow to deal with. 
Yes, gnomes, that's not a typo.  Damn good ones too.

Bruce Giller is the guy with the hard working knomes, that make petcock gaskets. I put a pair in my eldo's sugarcubes, about 12 years ago,and they work excellent. Bruce makes them out of Viton.
Rick D.
"You meet the most interesting people on a Guzzi"

Wildguzzi.com

Re: Does anyone know part number for the petcock rebuild gasket?
« Reply #3 on: February 01, 2023, 02:36:48 AM »

Offline bigbikerrick

  • Gaggle Hero
  • *****
  • Posts: 5848
  • 73 Eldo, 98 V 11 ,12 Ural Gear Up, 76 Convert,
  • Location: Southeastern corner of Arizona, right next to "Old Mexico, and New Mexico"
Re: Does anyone know part number for the petcock rebuild gasket?
« Reply #4 on: February 01, 2023, 02:37:48 AM »
Bruce can be found on the Loop List.
Rick D.
"You meet the most interesting people on a Guzzi"

Offline vintagehoarder

  • Cycle Hoarders
  • Gaggle Mentor
  • ****
  • *
  • *
  • *
  • *
  • *
  • Posts: 927
  • Ride to Eat, Eat To Ride
    • Facebook Page
  • Location: LaGrange KY
Re: Does anyone know part number for the petcock rebuild gasket?
« Reply #5 on: February 01, 2023, 06:35:40 AM »
Bruce can be found on the Loop List.
Rick D.

Loop list??
Cyclehoarders Garage
2021 Honda CT125 Trail Cub
2018 Triumph Tiger 800
2014 Moto Guzzi California Touring 1400
2014 Moto Guzzi V7 Speical
2009 Vepsa GTS 250 ie
1987 Suzuki Samurai (4 Wheels)
1981 Honda CX500 Deluxe
1973 Moto Guzzi Eldorado 850
1969 Yamaha YAS1C
La Grange, KY

Offline Nick

  • Gaggle Hero
  • *****
  • *
  • Posts: 2959
  • Location: New Jersey and Abruzzo
Re: Does anyone know part number for the petcock rebuild gasket?
« Reply #6 on: February 01, 2023, 09:32:27 AM »
Those gnomes sure do a good job.
Here is Bruce's email that I have: bcgiller at gmail dot com

Offline MMRanch

  • MMRanch
  • Gaggle Mentor
  • ****
  • Posts: 705
  • Evil wins if Good Men do Nothing
  • Location: Lynchburg , Tn.
Re: Does anyone know part number for the petcock rebuild gasket?
« Reply #7 on: February 01, 2023, 09:44:57 AM »
NCAmother

Here is all the gasket numbers anyone could ever need ... except head and exaust gaskets .   

Form-a-gasket Ultra Gray.     You put a thick film on both sides ... wait 10 minutes , put the two pieces together finger tight ... wait 30 minutes , then tighten to your spec.     

Never leak , made to fit , and easy as can be !   :smiley:

Don't make the "Thick Film" thick enough to squeeze out too much , but just a little .  The putting together finger (lightly)  tight and waiting is the most important part  ... you can wait a whole day before drawing it tight  if you want a "thick" gasket.
  :smiley: :smiley:
« Last Edit: February 01, 2023, 10:23:23 AM by MMRanch »
2016 V7-II Stone
2022 Royal Enfield Meteor Stellar Blue

Offline guzziart

  • Gaggle Mentor
  • ****
  • *
  • *
  • *
  • *
  • *
  • Posts: 838
  • Location: Northeast Ohio
Re: Does anyone know part number for the petcock rebuild gasket?
« Reply #8 on: February 01, 2023, 10:20:02 AM »
Bruce Giller is the guy with the hard working knomes, that make petcock gaskets. I put a pair in my eldo's sugarcubes, about 12 years ago,and they work excellent. Bruce makes them out of Viton.
Rick D.

 :thumb:  I've had them in my Eldo since '17.

Art
'71 CB350, '72 Eldo, '72 CL350, '81 CB125s, '87 LMIVSE, '91 CT70, '03 V11 Lemans, '08 Wing  ('12 Wee Strom - R.I.P.)

 

20 Ounce Stainless Steel Double Insulated Tumbler
Buy a quality tumbler and support the forum at the same time!
Better than a YETI! BPA and Lead free.
Advertise Here