Recent Posts

Pages: [1] 2 3 ... 10
1
General Discussion / Re: Le Mans 3 front brake calipers
« Last post by n3303j on Today at 07:20:36 AM »
The shims center the slot in the caliper on the disk so that each puck has an equal distance to travel to reach the disk.

There are so many factors effecting the relationship between the disk and the caliper that shimming the caliper is the easiest way to get the disk centered in the caliper body slot.
2
General Discussion / Re: Guzzi video with a message
« Last post by SIR REAL ED on Today at 07:04:18 AM »
Not a doctor, but I sat on the DOD's Medical (and defense) IRBs for 3 years.  I learned a few things based on some of the research protocols being conducted. This was when Proton Therapies were first approved for treatment of Prostate Cancer.  What I learned from the literature and research is that every man will develop prostate cancer at some point in their life. The question is when and what type/how bad. I don't have a history of PC in my family, but have been getting PSA's since 35, and the Army mandates Dr Cold Finger in your over 40 Physical.

5 years ago a 52 YO buddy had is PSA/poke as part of his annual physical and was perfect/normal. YET, 6 months later he died of an extremely aggressive and sudden onset of PC that went for his bones. Point is not to be morbid, but you can do EVERYTHING right, and take all precautions and tests. It's the responsible thing to do, but nothing is guaranteed. Live life, do your best, trust the Good Lord for the rest. So many factors at play, and there is only so much you can do.

But it is important for us to talk about it and take care of ourselves.



I love that meme!

Thanks for posting Bulldog9.  Words of wisdom.

Many years ago, my 16 year old brother-in-law went from perfectly healthy, with no symptoms, came home from school with a stomach ache, he died 24 hours later from acute leukemia.  Over the last year, two friends, one 55, the other 64 dropped dead instantly from a ruptured aorta.

You never know when your time is up.  As the saying goes "Tomorrow is promised to no man!"

Enjoy each moment!
3
General Discussion / Re: Wisconsin Rally July 31 - Aug 2
« Last post by kballowe on Today at 07:00:21 AM »
For those of you that don't want to camp or are just visiting:

They offer a day pass for $15.  Day pass with meal $25.

Discount on Saturday arrivals.






4
General Discussion / Re: Tennessee Riders Rally 2027???
« Last post by blu guzz on Today at 06:03:20 AM »
I am finally breaking free of the office this fall.  That is within easy striking range for me. Unless the wife plans something for the same dates, I would be in.
5
General Discussion / Le Mans 3 front brake calipers
« Last post by jerryS on Today at 02:32:48 AM »
Apparently there  is supposed to be a shim between the fork leg and the brembo caliper to 'properly' align the caliper to the disk. On my bike the shim is maybe 1mm.. So, a couple of questions: first, why is this actually necessary? The caliper is dual piston (one each side), so the caliper should self-centre the pads on the disk, right? Provided the caliper piston has enough travel, it should make no difference. What am I missing?.. The second query is that my le mans 3 (1983) has 1 shim on each bolt on the RH fork and 2 shims per bolt on the LH fork.. I can think of 2 possibilities here... 1. there is some setting up (shimming) process that is needed that I haven't found a reference to, or 2. a previous owner messed up. Can anyone shed some light on this?
6
General Discussion / Re: T3 clutch trouble while on trip
« Last post by John A on Today at 12:15:16 AM »
To replace the rear main seal you’ll pull the flywheel. If you do, it’s not a big deal , I would clean the cam plug and put sealant over it. JB weld or similar works well, I wouldn’t use silicone. The cam plug has a tendency to seep oil sometimes. There is also a gasket on the breather tube where it bolts to the crankcase you can replace if it looks like it needs it. The only alligator is the intermediate plate which will bend if you don’t use a bolt and compress the springs because the plate will not mate properly into the flywheel. You’ll see when you get it apart.
You may consider replacing the u joint carrier bearing.
7
General Discussion / Re: Tennessee Riders Rally 2027???
« Last post by AustinP on July 16, 2026, 10:50:51 PM »
Hi Bob. Tellico Plains is a nice staging area. Hopefully visitors are a win win for the local business owners and riders. I’d go for sure if the weather cooperates. There may be competing events around those timeframes mentioned because of the better weather. Take care and I hope you are having a great summer.
8
General Discussion / Re: New (to me) Norge
« Last post by Huzo on July 16, 2026, 09:56:04 PM »
I'm not sure,  It has the power windshield, color matched side and top cases, bottom lug, centerstand and heated grips but no Navigation.
It’s a GTL then, same exactly as this.

9
General Discussion / Re: Tennessee Riders Rally 2027???
« Last post by bobrebos1 on July 16, 2026, 09:28:38 PM »
Looking at possible dates of June 4-6 or 11-13, or Oct 1-3 2037, for a Tennessee rally.  Cooler then!  Better than July or August…2027
10
General Discussion / Re: Tennessee Riders Rally 2027???
« Last post by bobrebos1 on July 16, 2026, 09:16:13 PM »
I stay there a while back. I don't think they had as many cabins. It had a different name back then.

I'd give it a whirl. Nice riding area.

Can always choose a different place!
Pages: [1] 2 3 ... 10
***Wildguzzi Official Logo High Quality 5 Color Window Decals Back In Stock***
Shipping in USA Only. Awesome quality. Back by popular demand. All proceeds go back into the forum.
Best quality vinyl available today. Easy application.
Advertise Here