I am getting a 08 code on my 2010 Stelvio. When I looked at the diagnostics I am getting an "X" under DSB08 and the "X" is not in the active column, but in the memo column. I did a little research and found that DSB08 is an oil pressure anomaly. How does this differ from DSB07 which is an oil sensor failure?
I plan to clear the code and ride the bike for a while and see if the code comes back. I can almost guarantee it will because it seems I get the warning indicator every time I travel a more than 3K RPM on the tach and at one steady RPM for more than 2 or 3 minutes. Any suggestions on what to do next if the code comes back?