Author Topic: Freccia piston rings.  (Read 210 times)

Offline voncrump

  • Weekend Warrior
  • ***
  • Posts: 366
Freccia piston rings.
« on: April 13, 2021, 10:39:37 PM »
I have been supplied with a set of Freccia rings.
I had a look at them and decided to send them back.
The oil ring is only 2mm deep and the original is at least 3mm.
The original shows wear to a depth of 2mm in the groove.
This means the Freccia ring will start with only 1 mm engagement in the groove.
Also I suspect it may be chrome faced.
The engine is my Sport 1100, needs a fix up after bending an inlet valve.
So new valves, guides, rings and cam followers.
Cheers, voncrump





1996 1100 sport
2016 V711
1988  Lario ( long gone )
1982 V50111 (long gone)

 


Harper's Moto Guzzi : Go Ride , Break Parts, Call me!
Harper's Moto Guzzi. Where we still answer the phone, use the highest quality parts, and also do Transmission, rear drive, and carb rebuilds fast. Call us at 816.697.3411 and get your problems resolved.
http://www.harpermoto.com
Advertise Here