General Category > General Discussion

ABS removal

(1/5) > >>

Huzo:
I have a 2007 Norge and am thinking of removing the ABS stuff.
Has anyone here done it and what are the pitfalls ?
I can disable it with the switch, but it re engages at the next startup. I do contend that the braking feels “smoother” without the ABS engaged.

Bulldog9:
The 1200 Sport is ABS Free.  I imagine you could remove all the sensors, tone rings and the ABS unit with fuses and lines from the bike and just run brake lines from the MCs to the calipers, but I have no idea how that may or may not mess with the ECU or Dash.

fotoguzzi:
Yes, the Norge has a fuse (maybe 2) for the ABS. Try pulling those first. Maybe that’s all you have to do.
If I remember right they are in a separate fuse holder mounted to the battery cover with a rubber snubber.

Huzo:
Thanks guys for taking an interest.
It is the possibility of throwing a digital wrench into the ECU, that I fear the most.
If I were to de activate the system with a fuse pull, I would also want the hardware gone as well.

Huzo:
Will I have to put up with the incessant flashing of the warning light ?

Navigation

[0] Message Index

[#] Next page