Author Topic: V100 Mandello Merged Threadfest  (Read 150449 times)

Offline kingoffleece

  • SplitWeight(tm) seat covers
  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • *
  • *
  • Posts: 4129
  • Rated 5 STARS Motorcycle Consumer News
  • Location: Valley of the Sun
Re: V100 Mandello Merged Threadfest
« Reply #1170 on: February 12, 2023, 10:44:09 AM »
I was chatting with Jim Hamlin from Hamlin Cycles yesterday.  One topic was service for the new bike.  They just completed factory service training.  Recommended by factory is cam removal every 15K for check/adjustment.
SplitWeight(tm) seat covers. A King of Fleece LLC product.

Offline Bulldog9

  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • *
  • *
  • Posts: 2819
  • Location: United States
Re: V100 Mandello Merged Threadfest
« Reply #1171 on: February 13, 2023, 08:02:16 PM »
I was chatting with Jim Hamlin from Hamlin Cycles yesterday.  One topic was service for the new bike.  They just completed factory service training.  Recommended by factory is cam removal every 15K for check/adjustment.

That answers that. I imagine that the check is cams in, but as many suspected shim adjustment is cams out. Question remains when they will/may need shim adjustments.  Not saying this is a total game changer, but does impact my decision making for potential future wallet draining activity......
MGNOC#23231
The Living: 1976 Convert, 2004 Breva 750, 2007 GRiSO, 2008 1200 Sport, 2016 Stornello #742,
The Departed: 2017 MGX, 2014 Norge GT, 
In Stasis: 1978 XS750, XS1100SF

Offline HarveyMushman

  • Gosling
  • ***
  • Posts: 348
    • Photo Galleries
  • Location: Virginia, USA
Re: V100 Mandello Merged Threadfest
« Reply #1172 on: February 15, 2023, 06:40:19 PM »
I don't understand the angst about cams-out shim adjustments.  Yes, it's more involved than the old screw adjuster process. But only by a small margin, and the work area is just as conveniently presented as ever. 
Tim

Offline Kiwi_Roy

  • Gaggle Hero
  • *****
  • Posts: 9866
  • Location: New Westminster British Columbia, Canada
Re: V100 Mandello Merged Threadfest
« Reply #1173 on: February 15, 2023, 07:04:04 PM »
Many of the threads seem to be looking for a specific response, however if you just click on Reply it allows you to type anything in response, anything is better than nothing I reckon
17 V7III Special
76 Convert
Half a V9 Roamer

Moto Guzzi - making electricians out of riders since March 15 1921

Wildguzzi.com

Re: V100 Mandello Merged Threadfest
« Reply #1173 on: February 15, 2023, 07:04:04 PM »

Offline Bulldog9

  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • *
  • *
  • Posts: 2819
  • Location: United States
Re: V100 Mandello Merged Threadfest
« Reply #1174 on: February 15, 2023, 08:09:06 PM »
I don't understand the angst about cams-out shim adjustments.  Yes, it's more involved than the old screw adjuster process. But only by a small margin, and the work area is just as conveniently presented as ever.

So I hear you saying when I retire and am back in VA I can drop my V100 at your place for shims? :evil: 

Can't speak for anyone else, and I am a pretty decent wrench but I just hate OHC valvetrain work. I've done it on my XS11, FJR1300 and BMW M3 without catastropic (or any) failures. I'm sure there are timing marks for the cams and crank and ability to lock the tensioners back, but doing all this for two banks is too much of a PITA for me these days. Truly spoiled by the screw and nut adjusters on my Guzzi's and Porsche.
MGNOC#23231
The Living: 1976 Convert, 2004 Breva 750, 2007 GRiSO, 2008 1200 Sport, 2016 Stornello #742,
The Departed: 2017 MGX, 2014 Norge GT, 
In Stasis: 1978 XS750, XS1100SF

Offline HarveyMushman

  • Gosling
  • ***
  • Posts: 348
    • Photo Galleries
  • Location: Virginia, USA
Re: V100 Mandello Merged Threadfest
« Reply #1175 on: February 16, 2023, 07:17:25 AM »
So I hear you saying when I retire and am back in VA I can drop my V100 at your place for shims? :evil: 

Sure, man, but shop policy is to perform extensive post-service evaluation rides.
Tim

Offline blackcat

  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • *
  • Posts: 8926
  • Location: USA
Re: V100 Mandello Merged Threadfest
« Reply #1176 on: February 16, 2023, 08:47:48 AM »
I looked at the shop manual and it doesn’t look that complicated, but you will need the special tool to lock the sprockets. With the adjustment period every 15,000 miles I can see having to review the manual for the first few adjustments.





1968 Norton Fastback
1976 Lemans
1981 CX-100
1993 1000S
1997 Daytona RS
2007 Red Norge

Offline Madtownguzzi

  • Gosling
  • ***
  • Posts: 394
Re: V100 Mandello Merged Threadfest
« Reply #1177 on: February 16, 2023, 06:57:58 PM »
Nice review out of Germany on the 2023 Moto Guzzi V100 Mandello.
https://www.youtube.com/watch?v=YJE3-Rib59Q&t=193s
Randy S.
98 V11 EV
05 HD Electra Glide Classic
Madison, WI

Offline Huzo

  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • *
  • Posts: 13439
  • Location: Creswick Australia
Re: V100 Mandello Merged Threadfest
« Reply #1178 on: February 17, 2023, 02:07:44 AM »
I would be disconnecting those deflector things.
If I watch that video one more time, I just know I’m going to make an off colour comment.

Offline Murray

  • Gaggle Hero
  • *****
  • Posts: 3053
Re: V100 Mandello Merged Threadfest
« Reply #1179 on: February 17, 2023, 08:33:06 AM »
I looked at the shop manual and it doesn’t look that complicated, but you will need the special tool to lock the sprockets.

That has a 3d printer project stamped all over it.

Offline blackcat

  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • *
  • Posts: 8926
  • Location: USA
Re: V100 Mandello Merged Threadfest
« Reply #1180 on: February 17, 2023, 09:26:32 AM »
I looked at the shop manual and it doesn’t look that complicated, but you will need the special tool to lock the sprockets.

"That has a 3d printer project stamped all over it."

Yes it does, especially if the cost for the special tool is an issue.
1968 Norton Fastback
1976 Lemans
1981 CX-100
1993 1000S
1997 Daytona RS
2007 Red Norge

Offline LowRyter

  • Gaggle Hero
  • *****
  • *
  • *
  • Posts: 16737
  • Location: Edmond OK
Re: V100 Mandello Merged Threadfest
« Reply #1181 on: February 18, 2023, 05:07:56 PM »
I looked at the shop manual and it doesn’t look that complicated, but you will need the special tool to lock the sprockets.

"That has a 3d printer project stamped all over it."

Yes it does, especially if the cost for the special tool is an issue.

I'm guessing there are no slots to thread in some baling wire?
John L 
When life gets you down remember it's one down and the rest are up.  (1-N-23456)

Offline Vagrant

  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • *
  • *
  • Posts: 2292
  • Location: Gainesville, Ga or Green Valley Az.
Re: V100 Mandello Merged Threadfest
« Reply #1182 on: February 18, 2023, 05:52:33 PM »
16 penny nail.
HE IS FREE WHO LIVES AS HE CHOOSES
2016 V7II, 2017 V7-III Blue special, 2022 V85 the fast red one! 2016 650 Versys 2023 V85 Guardian of the Oreo's
L-196, L-197

Offline ridingron

  • Gosling
  • ***
  • *
  • Posts: 280
  • Location: Orlando
Re: V100 Mandello Merged Threadfest
« Reply #1183 on: February 18, 2023, 07:03:20 PM »
I have a Honda with the bucket and shim set up. It is like a Guzzi but a V-4 instead of twin. At 104K miles, I pulled the valve covers to check the valves. Turn the motor over to get the valve in position. Check the clearance. Move to next valve.  All 8 were still in spec. as  from the factory. Is that because it's a Honda? Yes, if one needs adjusting, the cam must come out. It's really not that big of a deal.

It is a little bit more than the old screw adjuster process. But not much.

Offline steven c

  • Gaggle Hero
  • *****
  • *
  • *
  • Posts: 4170
  • Location: Broad Brook CT
Re: V100 Mandello Merged Threadfest
« Reply #1184 on: February 19, 2023, 08:03:25 AM »
I just check the valves on my 2010 650 VStrom (all within spec at 18K) I wish they where that easy to get to. On the GS850 and XT350 I had, if you had to replace a shim just used a special tool ,on the GS I think I used a screw driver to compress the bucket and remove the shim pretty easy no cam to remove. But if you have to remove cam its not hard just take your time and make sure the marks line up when putting back together.
2020 V85TT Traveler
74 949 Eldorado


75 Benelli 250
2006 Buell Ulysses
78 Honda XL125

MGNOC 6412

Offline spmoto

  • Gaggle Mentor
  • ****
  • *
  • *
  • Posts: 711
  • Location: Unity, Maine
Re: V100 Mandello Merged Threadfest
« Reply #1185 on: February 19, 2023, 11:35:30 AM »
Has anyone here actually ridden off the dealer's lot with one of these yet???

Offline mechanicsavant

  • Gaggle Mentor
  • ****
  • *
  • *
  • *
  • Posts: 611
  • Location: wales ma.
Re: V100 Mandello Merged Threadfest
« Reply #1186 on: February 19, 2023, 12:27:15 PM »
It has been my experience w/shim over or under bucket that once everything is settled in , valve clearances hardly vary at all . This is based on a number of Asian & European OHC engines . That’s not to say there won’t be a few “anomalies “ out there , but there is a boatload of experience out there . I am kinda wondering why they didn’t use a finger follower type arrangement either with hydraulic, or mechanical adjusters . Cost , maybe? Simplicity?

Offline Huzo

  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • *
  • Posts: 13439
  • Location: Creswick Australia
Re: V100 Mandello Merged Threadfest
« Reply #1187 on: February 19, 2023, 12:31:42 PM »
Has anyone here actually ridden off the dealer's lot with one of these yet???
Could be wrong, but I reckon if anybody had one, it might have come up in conversation.

Offline blackcat

  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • *
  • Posts: 8926
  • Location: USA
1968 Norton Fastback
1976 Lemans
1981 CX-100
1993 1000S
1997 Daytona RS
2007 Red Norge

Offline dguzzi

  • Gaggle Hero
  • *****
  • *
  • Posts: 1577
  • Sorry, I'm woke so I'll be quiet.
Re: V100 Mandello Merged Threadfest
« Reply #1189 on: February 19, 2023, 02:31:22 PM »
Could be wrong, but I reckon if anybody had one, it might have come up in conversation.
  They have a poor track record  (See Hydro problems)  Also the Griso issues leading to rollers.
'03 EVT
'87 Cagiva
'72 Commando
'71 Commando
'90 Miata
'16 Mustang

Offline Huzo

  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • *
  • Posts: 13439
  • Location: Creswick Australia
Re: V100 Mandello Merged Threadfest
« Reply #1190 on: February 19, 2023, 03:34:02 PM »
  They have a poor track record  (See Hydro problems)  Also the Griso issues leading to rollers.
I don’t understand what you mean.

Offline guzzisteve

  • Gaggle Hero
  • *****
  • *
  • Posts: 11725
  • "Just Ride It"
Re: V100 Mandello Merged Threadfest
« Reply #1191 on: February 19, 2023, 05:55:34 PM »
It means they could be junk, and what electrics won't work, dash etc.
"Pray through Carlo & your bike shall be healed"
Location: Planet Earth

Offline LowRyter

  • Gaggle Hero
  • *****
  • *
  • *
  • Posts: 16737
  • Location: Edmond OK
Re: V100 Mandello Merged Threadfest
« Reply #1192 on: February 19, 2023, 09:57:49 PM »
I don’t understand what you mean.

yes you do   :evil:
John L 
When life gets you down remember it's one down and the rest are up.  (1-N-23456)

Offline Huzo

  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • *
  • Posts: 13439
  • Location: Creswick Australia
Re: V100 Mandello Merged Threadfest
« Reply #1193 on: February 19, 2023, 11:40:12 PM »
yes you do   :evil:
I take your point LR, but it was a bit obscure.

Offline steven c

  • Gaggle Hero
  • *****
  • *
  • *
  • Posts: 4170
  • Location: Broad Brook CT
2020 V85TT Traveler
74 949 Eldorado


75 Benelli 250
2006 Buell Ulysses
78 Honda XL125

MGNOC 6412

Offline blackcat

  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • *
  • Posts: 8926
  • Location: USA
Re: V100 Mandello Merged Threadfest
« Reply #1195 on: February 20, 2023, 06:28:54 AM »
From what I’ve read there is a problem with a coolant line on some bikes. A few owners have shown pictures of minor leakage from the same hose clamp. And a couple have reported rattling windshield armatures which were easily tightened.
1968 Norton Fastback
1976 Lemans
1981 CX-100
1993 1000S
1997 Daytona RS
2007 Red Norge

Offline bad Chad

  • Gaggle Hero
  • *****
  • *
  • Posts: 9633
  • Location: Central Il
Re: V100 Mandello Merged Threadfest
« Reply #1196 on: February 20, 2023, 09:02:50 AM »
Lots of people have ridden off the lot, just not yet in North America.

Or perhaps some have, but they don’t like the incessant complaining so prevalent here?
2007 Breva 1100  Red Arrow (and faster than yours!)
2016 CSC 250TT Zongshen
2017 V9 Roamer

Offline kingoffleece

  • SplitWeight(tm) seat covers
  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • *
  • *
  • Posts: 4129
  • Rated 5 STARS Motorcycle Consumer News
  • Location: Valley of the Sun
Re: V100 Mandello Merged Threadfest
« Reply #1197 on: February 20, 2023, 09:15:14 AM »
Well, that was certainly a well written and thought out piece on the new bike.
One of the very best reviews I've ever read about any motorcycle.  Thoughtful intelligent discussion with an historical backdrop.  Very entertaining to say the least.
SplitWeight(tm) seat covers. A King of Fleece LLC product.

Offline skippy

  • Gaggle Mentor
  • ****
  • Posts: 734
Re: V100 Mandello Merged Threadfest
« Reply #1198 on: February 20, 2023, 10:35:08 AM »
Well, that was certainly a well written and thought out piece on the new bike.
One of the very best reviews I've ever read about any motorcycle.  Thoughtful intelligent discussion with an historical backdrop.  Very entertaining to say the least.

I will second that. This is a really well written and concise review of not only the V100 but of Moto Guzzi as a whole.

Skippy

23 V100 Mandello
20 V85TT

Offline Huzo

  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • *
  • Posts: 13439
  • Location: Creswick Australia
Re: V100 Mandello Merged Threadfest
« Reply #1199 on: February 20, 2023, 11:30:20 AM »
Or perhaps some have, but they don’t like the incessant complaining so prevalent here?
Don’t be too hard on yourself Chad, you’re not that bad.

***Wildguzzi Official Logo High Quality 5 Color Window Decals Back In Stock***
Shipping in USA Only. Awesome quality. Back by popular demand. All proceeds go back into the forum.
Best quality vinyl available today. Easy application.
Advertise Here
 

20 Ounce Stainless Steel Double Insulated Tumbler
Buy a quality tumbler and support the forum at the same time!
Better than a YETI! BPA and Lead free.
Advertise Here