Recent Posts

1

General Discussion / Re: Yesterday's big adventure

« Last post by 1wild1 on Today at 09:21:57 PM »

10.5 hours on the V85TT that day. Traffic was crazy from St. Louis going south on hwy55. Got some good shots though.

2

General Discussion / Re: Set-screw size?

« Last post by ridingron on Today at 09:18:28 PM »

What model are the turn signals from?

There has to be a parts fiche on the net some where that will give the information.

3

General Discussion / Re: Why multis are better - Nerd-alert!

« Last post by LowRyter on Today at 09:00:58 PM »

missing here

multis  <RPMs

4

General Discussion / Re: Knuckle Duster Head Protectors!

« Last post by Tom H on Today at 08:53:18 PM »

Guzzi Classics said he didn't have them as pictured.

Tom

5

General Discussion / Re: Breather hose on V7 Sport

« Last post by Air-Cooled on Today at 08:26:53 PM »

I use this hose: https://www.mcmaster.com/5235K55/ It's soft and flexible enough that it can be greased up and inserted through the metal holder fairly easily. I cut the end at a sharp angle which aids in inserting it through the holder.

Great info!

6

General Discussion / Re: Set-screw size?

« Last post by Air-Cooled on Today at 08:23:56 PM »

Unfortunately, I used thread gauges at three different stores.  The only one that would accept it was a 10-32, but 10-32 screws will not fit into the turn signal.  That is the reason I posted the question here.  I hoped someone might have had to replace one and would know. 

7

General Discussion / Re: Breather hose on V7 Sport

« Last post by 73 sport on Today at 08:23:53 PM »

      ed is used in optics. od is used in mechanics.

8

General Discussion / Re: Set-screw size?

« Last post by Kev m on Today at 08:20:54 PM »

I mean, we CAN know. All it should take is a proper thread gauge. No?

9

General Discussion / Re: Breather hose on V7 Sport

« Last post by Antietam Classic Cycle on Today at 08:12:09 PM »

I use this hose: https://www.mcmaster.com/5235K55/ It's soft and flexible enough that it can be greased up and inserted through the metal holder fairly easily. I cut the end at a sharp angle which aids in inserting it through the holder.

10

General Discussion / Re: Introductions thread...Introduce yourself to the group !

« Last post by hovent on Today at 07:57:22 PM »

My Name is Scott
Live in Kaneohe, Hawaii USA
I have a 2006 Breva V1100

Over 60 for sure! Still riding till I die!!

Semi retired, it's Hawaii... we all have to keep working here to survive.