Wildguzzi.com
General Category => General Discussion => Topic started by: wicks on November 02, 2015, 09:24:00 PM
-
Anyone got a picture of the correct rear brake lever assembly with the rod across for the US version? Wondering if I am supposed to have a washer/spacer in between frame and lever/clamp on the other side - lots of play back and forth that doesn't seem right.
-
I sent Gregory Bender a scan of an original parts book for the 1974 750S, same parts assembly for the V7 Sport right hand brake assembly. There are spacers, rubber bits and even a spring in the assembly
You can find the diagrams here
http://www.thisoldtractor.com/moto_guzzi_tonti_spare_parts_catalogs___exploded_parts_diagrams___parts_fiche.html
Cheers
Jim
-
Ahh - much thanks! Looks like I am missing some parts.
-
I haven't compared the 750S parts list to the 850T, they may be the same but can't say for sure. I think This Old Tractor has the 850T parts list as well.
Harper's may have the pieces you need.
-
Yeah I am missing the outer "rings". I think I also want to replace the pair of PN22 "cap" as well, they are stretched out and slipping onto the bar, not creating a snug centering of the bar between the frame as they should.
Just had the engine pulled and a bunch of work done, worried there may be other oddments missing pieces/etc.
-
TLM Moto Guzzi has both 90716139 and 14677200 in stock, not too expensive either.
-
Harper's had both too, half the price. ;)