Wildgoose Chase Moto Guzzi

General Category => Bike Builds, Rebuilds And Restorations Only => Topic started by: rdwrv4 on March 30, 2017, 12:31:06 AM

Title: Eldorado wiring,
Post by: rdwrv4 on March 30, 2017, 12:31:06 AM
Just finishing my Eldorado, it's in the kitchen.  beautiful!! Anyway I did not take off the harness and installing a new one. I am having trouble understanding why the heavy cable to the starter is so long and how to route the wires to the back end of the bike ,all the wires through the little hole in the fender??. A grommet there? in the fender?  Wire routing pictures would be great Dash and headlight bucket pics too ,I am  trying to keep it very original. Thx Robin
Title: Re: Eldorado wiring,
Post by: arveno on March 30, 2017, 07:02:12 AM

this website might help. sorry i suck at wiring.
Grommet ? yes .
Title: Re: Eldorado wiring,
Post by: guzziart on May 13, 2017, 04:46:27 PM
Hi Robin,

I'm doing my '72 Eldo.  I got a grommet at the local Tractor Supply to replace the failing one.  The wires for the TS & S/T lights route as described at Bender's site.  However, the wire hole at the taillight didn't have a grommet (on mine) and the hole is partially covered by the taillight bracket so, I haven't figured out what to do there yet.  Also, I'm trying to figure out how to route the battery cable to the starter too.....I should have taken more pics.

Good Luck,

Title: Re: Eldorado wiring,
Post by: Tom H on May 19, 2017, 12:13:42 AM
Hopefully one of these images will help with the battery to starter. From my 850 and 750. The rear fender uses a grommet, can't remember if I drilled the hole bigger or not.

(http://thumb.ibb.co/fy5myF/WP_20170518_16_44_24_Pro.jpg) (http://ibb.co/fy5myF)

(http://thumb.ibb.co/df2MXa/WP_20170518_16_45_01_Pro.jpg) (http://ibb.co/df2MXa)

(http://thumb.ibb.co/jiTvsa/WP_20170518_16_48_49_Pro.jpg) (http://ibb.co/jiTvsa)

(http://thumb.ibb.co/f0TH5v/WP_20170518_16_49_07_Pro.jpg) (http://ibb.co/f0TH5v)

lossless image hosting (http://imgbb.com/)