Wildgoose Chase Moto Guzzi

General Category => General Discussion => Topic started by: voncrump on April 13, 2021, 10:39:37 PM

Title: Freccia piston rings.
Post by: voncrump on April 13, 2021, 10:39:37 PM
I have been supplied with a set of Freccia rings.
I had a look at them and decided to send them back.
The oil ring is only 2mm deep and the original is at least 3mm.
The original shows wear to a depth of 2mm in the groove.
This means the Freccia ring will start with only 1 mm engagement in the groove.
Also I suspect it may be chrome faced.
The engine is my Sport 1100, needs a fix up after bending an inlet valve.
So new valves, guides, rings and cam followers.
Cheers, voncrump
(https://i.ibb.co/DbTdXJn/11487-A52-39-AD-488-F-A978-82-D07271-A0-BA.jpg) (https://ibb.co/DbTdXJn)

(https://i.ibb.co/fQP7sY9/174-E5852-7-C9-E-4-BCE-8566-6-A4-FA43-ABA14.jpg) (https://ibb.co/fQP7sY9)

(https://i.ibb.co/6N0gjSm/B90-A04-DE-D201-4-D75-AB04-24875-A5-E2349.jpg) (https://ibb.co/6N0gjSm)