Author Topic: When is it logical to get shafted ?  (Read 945 times)

Offline Alfetta

  • Gosling
  • ***
  • Posts: 425
  • Location: Ozarks
When is it logical to get shafted ?
« on: November 29, 2021, 01:45:55 PM »
So while reading another post, I noticed a bike with a transversely mounted V-twin, utilizing a shaft drive system. I know that this is nothing new, and there are several machines out there that are configured such.... But I'm not sure why.

In the case of a GOLD WING, BMW, Guzzi, or other Longitudinally mounted engines, the shaft drive system makes sense as the 90 orientation is required to drive the rear wheel. but in the case of transversely mounted engines, I don't know why any manufacture would opt for changing the drive direction TWICE ??  not to mention that the bevel drive gears carry higher transmission losses than conventional gears.

In todays world of belt drives and o-ringed chains, there is no need to lubricate, hygiene and longevity is much improved. thus the added weight, cost and complexity of a shaft system (esp. a dual bevel gear type) only seems to be a burden.
Nothing much better than a Tannat from the Salta region.

Offline Kiwi_Roy

  • Gaggle Hero
  • *****
  • Posts: 9796
  • Location: New Westminster BC
Re: When is it logical to get shafted ?
« Reply #1 on: November 29, 2021, 05:55:14 PM »
Yes, I used to own a nice Suzuki Boulevard S50 that did that, Change Direction twice.
I think it makes no sense, they should have used a belt drive like the S40
72 Eldorado
17 V7iii Special
76 Convert
Half a V9 Roamer

Moto Guzzi - making electricians out of riders since March 15 1921

Offline JC85

  • Gaggle Mentor
  • ****
  • *
  • Posts: 616
  • Location: Chanute, KS
Re: When is it logical to get shafted ?
« Reply #2 on: November 29, 2021, 08:10:51 PM »
I'm very confused...Guzzis and BMWs are transversely mounted, are they not???
'74 Eldo Police Model
'07 CalVin

Offline lucian

  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • *
  • Posts: 3316
  • Location: Maine, Ayuh
Re: When is it logical to get shafted ?
« Reply #3 on: November 29, 2021, 08:28:01 PM »
Apparently when you pull up to a gas pump lately  :sad:

Wildguzzi.com

Re: When is it logical to get shafted ?
« Reply #3 on: November 29, 2021, 08:28:01 PM »

Offline nc43bsa

  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • *
  • Posts: 1353
  • Location: Mooresville NC
Re: When is it logical to get shafted ?
« Reply #4 on: November 29, 2021, 09:27:02 PM »
I'm very confused...Guzzis and BMWs are transversely mounted, are they not???

From the engineering point of view, the orientation of the crankshaft determines whether an engine is transverse or longitudinal.  If the axis of the crank is across the frame (parallel to the axis of the wheel axle) it is transverse.  If it is perpendicular to the wheel axle, it is longitudinal.
1990 MilleGT

Offline Dimitri_Harkov

  • Hatchling
  • **
  • Posts: 166
  • Location: Vienna, Austria
Re: When is it logical to get shafted ?
« Reply #5 on: November 30, 2021, 01:31:26 AM »
My only explanation (why isnt' it explaination by the way? Makes no sense):

The designers/engineers think they have power to spare/can afford the extra weight and want to make sure the bike is no hassle on even the longest tour (belt/chain-wise).
Of course with the trade-off of a more costly rebuild/maintenance procedure on the shaft drive now and then.

Or maybe they just liked the idea of a shaft drive and that's it.
Stranger things have happened on bikes & cars.

Cheers,
D.
2020 V7 III Stone Night Pack

Offline guzzista

  • Gaggle Hero
  • *****
  • Posts: 1048
  • Location: SF Bay Area
Re: When is it logical to get shafted ?
« Reply #6 on: November 30, 2021, 04:26:30 AM »
Back when chain drive was the default design for motorcycle drivetrains and  only BMW , Guzzi  and Honda GW were configured with a shaft drive, the MV750 was the only bike that had  a transverse

crank and shaft drive. That gave Magni an opportunity to simplify the drivetrain, regain a bit more  power from less torsional losses and make the MV's more appealing (imo) with his  chain drive conversions
1975 750S Tribute bike, 1994 Cali 1100, 2007 Ducati GT1000, 1983 SP1000, 1973 V7Sport project, 2017 California1400 Touring

Offline Dimitri_Harkov

  • Hatchling
  • **
  • Posts: 166
  • Location: Vienna, Austria
Re: When is it logical to get shafted ?
« Reply #7 on: November 30, 2021, 04:41:41 AM »
There was also the Yamaha XS 750 (and 850).

Very nice machines with transverse engine and shaft drive.



Cheers,
D.
2020 V7 III Stone Night Pack

Offline Huzo

  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • *
  • Posts: 13202
  • Location: Creswick Australia
Re: When is it logical to get shafted ?
« Reply #8 on: November 30, 2021, 05:02:30 AM »
The XV 750 Yamaha was another.


Offline Dave_NWTrophy

  • New Egg
  • *
  • Posts: 47
Re: When is it logical to get shafted ?
« Reply #9 on: November 30, 2021, 04:42:11 PM »
Chains, even x- and o-ring ones, still require cleaning and maintenance, and will last about 12,000 miles or so if maintained:

https://www.revzilla.com/common-tread/bmws-maintenance-free-m-endurance-chain-put-to-the-test

Belts will last about 50,000 miles or so, but tension has to be checked every 2,500 to 5,000 miles.  They also don't work well for off road or even gravel, as a stone picked up in the belt will blow through it when it hits the sprocket.  Ask me how I know....

Shaft drive components will last tens of thousands of miles, usually outlasting engines and gearboxes.  I've had mostly shaft drive motorcycles for the last 20 years (Yamaha XV920J, Triumph Trophy, now two Guzzis), and it is still the final drive of choice for the riding I do.

Dave

Offline moto-uno

  • Gaggle Hero
  • *****
  • *
  • Posts: 1397
  • Location: Burnaby , B.C
Re: When is it logical to get shafted ?
« Reply #10 on: November 30, 2021, 05:08:32 PM »
  Something else that's been ignored , is , let's be honest , chains and sprockets are cheap to produce .
  Peter

Offline smsw

  • New Egg
  • *
  • *
  • Posts: 99
  • Location: Cleveland, O
Re: When is it logical to get shafted ?
« Reply #11 on: December 01, 2021, 08:14:29 PM »
  Something else that's been ignored , is , let's be honest , chains and sprockets are cheap to produce .
  Peter
Lot of reasons for a chain drive, more efficient, lighter weight, as well as cheaper, etc.  Mfr's do not generally care about an owner's maintenance problems.

 

Quad Lock - The best GPS / phone mount system for your motorcycles, no damage to your cameras!!
Get a Wildguzzi discount of 10% off your order!
http://quadlock.refr.cc/luapmckeever
Advertise Here