Kickstand Extension Pad

[Dirk_S]

Since adding so lightly longer fork springs and rear shocks to my V7, I wanted to knock out the extra lean that my V7II now has when the side stand is down. Found nothing model specific, so I gave this $40+ aluminum piece on Amazon a shot.

Fits the stand foot almost perfectly, just a hair loose depth-wise. I’ll see what a cut-out piece of super thin cutting mat does for shimming. A tad heavier than I expected. Should provide enough of a riser to ease my tip-over concern and provides a wider foot for those sandy / dirt areas. Definitely adding some blue loctite.





Motorcycle Side Stand Enlarger Plate Kickstand Extension Pad Support Plate For Moto Guzzi 1200 Stelvio 8V NTX 1200 Stelvio 8V STD/NTX 1200 Stelvio NTX ABS 750 V7 Special-Stone 1200 Stelvio (Black) https://www.amazon.com/dp/B08733M8C4/ref=cm_sw_r_cp_api_glt_i_VE9Y92HXAD1DETE0VBHX?_encoding=UTF8&psc=1

[Perazzimx14]

Hockey puck and a couple #8 screws also work a treat at widening the footprint and lessening the lean angle.

[Dirk_S]

Hockey puck and a couple #8 screws also work a treat at widening the footprint and lessening the lean angle.

Yeah, I should’ve thought of that before buying something, but for some dumb reason I was hesitant of the idea of drilling into the stand’s footpad... even though I considered having something welded on.

[egschade]

$12 China cheapie from eBay. Had to use slightly longer screws which got blue thread lock treatment. https://www.ebay.com/itm/Universal-Motorcycle-CNC-Kickstand-Sidestand-Extension-Pad-Plate-Foot-Side-Stand/174536871700

[John Warner]

. . . even though I considered having something welded on.

That's what I did on my Stelvio.