Author Topic: ID This Guzzi Gizmo? (Read 10501 times)

Bill Hagan · « **on:** February 22, 2015, 09:32:27 AM »

Well, at least, I think it is from one of my Guzzis. ::)

So, hypothetically speaking, of course, if one would (theoretically) end up with a leftover thingamabob while reassembling an EV or Norge, what would this little guy be?

Don't think it's from my Griso, as I gave up futzing with the quick-release until I finish servicing the Norge.

Thanks.

Bill

Cam3512 · « **Reply #1 on:** February 22, 2015, 09:35:09 AM »

Yup, definitely a thingamabob.

BillinPA · « **Reply #2 on:** February 22, 2015, 09:36:28 AM »

Hi Bill, It is obviously a spacer, might help if we knew what general areas you disassembled on each bike.

56Pan · « **Reply #3 on:** February 22, 2015, 09:40:58 AM »

That looks like a spacer between the backside of two of the lower fairings and either the oil sump fairing mounting boltholes or frame mounts on my '12 Norge. Had those fairings off a few weeks ago. This is from memory and is worth what you're paying for it.

John A · « **Reply #4 on:** February 22, 2015, 09:41:46 AM »

My guess is a shock absorber mount spacer

Asylum · « **Reply #5 on:** February 22, 2015, 09:45:49 AM »

It seems as if there was a sleeve or a spring that was pressed up against the spacer. That thought came to mind when I noticed the black ring on the washer, and how it's off centered.

Good luck

RinkRat II · « **Reply #6 on:** February 22, 2015, 09:48:19 AM »

~; Looks to be a non metallic Vernier caliper next to a Thingamabob. You're welcome.

Paul :BEER:

guzzisteve · « **Reply #7 on:** February 22, 2015, 09:53:26 AM »

6mm hole. EV spacer for evap canisters to mount, OR the tin(chrome) frame covers in front of fuel tank. Spacers on the back have a step in them.
There is also one like that on bottom of license plate mount to fender.

blackcat · « **Reply #8 on:** February 22, 2015, 09:53:56 AM »

If you flip that over it might say, "Mr. Nevada Commemorative Doughnut", though I think they originally were pink with sprinkles.

tusong200 · « **Reply #9 on:** February 22, 2015, 10:04:20 AM »

Quote from: john A on February 22, 2015, 09:41:46 AM

My guess is a shock absorber mount spacer

My first thoughts as well but I think its a bit too small.

Rich A · « **Reply #10 on:** February 22, 2015, 10:08:33 AM »

Spacer for mounting a silencer? I often seem to need something like this when I'm mounting up a non-stock exhaust.

Or a spacer for a saddle bag rack.

Rich A

Scott DeRoss · « **Reply #11 on:** February 22, 2015, 10:26:37 AM »

Quote from: Cam3512 on February 22, 2015, 09:35:09 AM

Yup, definitely a thingamabob.

Or a whatchamacallit :)

Two Checks · « **Reply #12 on:** February 22, 2015, 10:28:35 AM »

Spacer between frame rail and grab bar on Tonti frame bike.

Bill Havins · « **Reply #13 on:** February 22, 2015, 11:00:25 AM »

I don't believe it is off of your HD&M, but what do I know? As Steve said, the "sheet metal spacers" on the EV are all stepped. And I don't recall any of the spacers on my EV being of the "chromed-metal-bottle-cap-packed-with-rubber" variety.

As above, consider what you serviced on either bike and zero in from there.

Or maybe Wayne or Lannis came by while you were out and threw it in the door just to cause mischief? ;D

mgfan · « **Reply #14 on:** February 22, 2015, 12:20:35 PM »

I've got one if you want to have a pair of them. Have no idea where it came from! :BEER:

mtiberio · « **Reply #15 on:** February 22, 2015, 12:24:40 PM »

If it was a 70s era tonti, that would be a coil mount spacer or maybe front tank mount spacer

Lannis · « **Reply #16 on:** February 22, 2015, 12:29:31 PM »

Quote from: Bill Havins on February 22, 2015, 11:00:25 AM

Or maybe Wayne or Lannis came by while you were out and threw it in the door just to cause mischief? ;D

Heh heh heh .....

BillinPA · « **Reply #17 on:** February 22, 2015, 03:51:06 PM »

Maybe top windshield bolt on EV opposite the cable guide.

rodekyll · « **Reply #18 on:** February 22, 2015, 09:27:57 PM »

Solo saddle hinge spacer?

I'm still trying to understand how an attorney asks a question he doesn't already know the answer to.

Guzzistajohn · « **Reply #19 on:** February 22, 2015, 09:34:57 PM »

Looks just like an asshole off a hobby horse to me ;D

Sasquatch Jim · « **Reply #20 on:** February 22, 2015, 10:12:31 PM »

Hobby horses don't have ass holes. They're for kids. Kids don't want to shovel horse poop.

Guzzistajohn · « **Reply #21 on:** February 22, 2015, 10:30:35 PM »

You suspender snapping old fart. You will even argue about hobby horse assholes ;D ;D ;)

twhitaker · « **Reply #22 on:** February 23, 2015, 07:05:21 AM »

That spacer might go between the sidestand and the engine. Doesn't the Norge have one that mounts that way?

lucian · « **Reply #23 on:** February 23, 2015, 01:11:01 PM »

Looks like one of the spacers off one of the bolts securing the carc tourque reaction arm.

Bill Hagan · « **Reply #24 on:** February 23, 2015, 01:25:18 PM »

Thanks to (nearly ;D) all.

In Atlanta this week. Will try to resolve the mystery next week.

Bill

News:

Author Topic: ID This Guzzi Gizmo? (Read 10501 times)

Bill Hagan

56Pan

Asylum

tusong200

Bill Havins

Bill Hagan