Recent Posts

1

General Discussion / Re: Stelvio Brake Discs

« Last post by rocker59 on Today at 03:04:01 PM »

Personally, I would acquire Ducati take-offs from eBay rather than buying new CCC.

Guzzi shares the same Brembo parts bins as Ducati, and those Ducatisti are always upgrading and selling off perfectly good brake parts.

2

General Discussion / Re: Mistral h-pipe with T3FB?

« Last post by yackee on Today at 03:02:04 PM »

I guess my question is whether the T3 floor board lower rails, with the large bracket for the police-style side stand, need a different exhaust header than a non-FB bike? the problem seems to be that the Mistral header interferes with the bracket (or vice versa), so that the exhaust header can't rotate "out" from the bike to where it needs to be in order for the headers to be even/centered and for the left-side muffler to line up with the hanging bracket.

3

General Discussion / Re: Breva V1100 Fuel Pump

« Last post by moto-uno on Today at 02:39:58 PM »

  If you have the time , vinegar is not too bad at removing the deposits , use lots ( it's cheap) , shake a bit and do this as often as you
remember over the span of a few days . Peter

4

General Discussion / Re: Stornello Replacement Tires?

« Last post by rocker59 on Today at 02:04:30 PM »

You might look at the Heidenau Scout K60

5

General Discussion / Re: Big Block vs. Small Block for Lollipop Guild Member

« Last post by Mwether on Today at 01:59:34 PM »

Yes Nevada is a steel tank.....very similar to my old V65 Florida (also steel tank) & seat height of these is super low -

...Handling is fantastic & easy to throw around

Thanks for that, Paul. 

Now I need to see if the seller will move from $4250. There's no way that bike is worth that much to me...

6

General Discussion / Re: Mistral h-pipe with T3FB?

« Last post by John A on Today at 01:52:47 PM »

I have cut the h pipe and installed a slip joint because if it’s in a bind it will crack. I used some band clamps like the muffler clamps. I think I used clamps for an Ambassador because they have to do down small enough for a good fit on the slip joint.

7

General Discussion / Re: Moto Guzzi National Owners Club (MGNOC) National Rally 2024 @ John Day, Oregon

« Last post by JJ on Today at 01:45:21 PM »

Serious question from relocated east coast rider to the southwest.
How do I cross all that desert and not get completely cooked riding up from PHX?  Late June is brutal.

* Start riding at dawn...first light...get your miles in early, then call it quits early.  3-4pm is usually the hottest time of the day. 

* I am NOT a big fan of riding after dark, but that is another option...

* Wear warm weather riding gear...A cooling vest will help...

* Stop and HYDRATE with water often...and as often as required...

* Don't push yourself as THE HEAT can be a killer...

8

General Discussion / Mistral h-pipe with T3FB?

« Last post by yackee on Today at 01:30:06 PM »

Hi all,

After a long absence I am finally getting my T3 (floorboard model) back together. I am in the process of installing a new Mistral exhaust system. I have the h-pipe too. (https://www.mgcycle.com/index.php?main_page=product_info&cPath=26_95&products_id=5864)

Just to make sure I'm not going crazy, it seems that the h-pipe doesn't work with the floorboard model, the "cut-out" on the police-style side-stand bracket forces the left-hand header close in to the frame, and leaves the right-hand header away from the frame. I assume there is no solution (apart from cutting off the side-stand bracket, which I don't want to do)?

Thoughts appreciated!
Jason

9

General Discussion / Re: Moto Guzzi National Owners Club (MGNOC) National Rally 2024 @ John Day, Oregon

« Last post by PJPR01 on Today at 12:24:13 PM »

Serious question from relocated east coast rider to the southwest.
How do I cross all that desert and not get completely cooked riding up from PHX?  Late June is brutal.

Facing the same issue coming out of Texas in brutal heat, I wear a 3 liter camelback, fill it with ice and a bit of gatorade and mostly water, and fill it up at every gas stop with ice.  The ice melts slowly, keeps the liquid nice and chilled and I stay hydrated.

Clothing...if it's killer hot, I don't wear a mesh jacket, or you just dehydrate even faster...I also stop about every 1/2 hour and pour a bottle of water on my head, shirt etc...keeps some evaporation / cooling effect. 

Ride early early morning helps to get some miles down before the killer heat kicks in...

10

General Discussion / Re: Moto Guzzi National Owners Club (MGNOC) National Rally 2024 @ John Day, Oregon

« Last post by kingoffleece on Today at 12:14:38 PM »

Serious question from relocated east coast rider to the southwest.
How do I cross all that desert and not get completely cooked riding up from PHX?  Late June is brutal.