Wildguzzi.com

General Category => General Discussion => Topic started by: ray bear on January 26, 2023, 06:54:09 PM

Title: which convertor do I have
Post by: ray bear on January 26, 2023, 06:54:09 PM
Can some one identify my converter , do I have a good one or bad thanks Ray


(https://i.ibb.co/PFzQf7g/IMG-0454-1.jpg) (https://ibb.co/PFzQf7g)

(https://i.ibb.co/6HGL8Kk/IMG-0455-1.jpg) (https://ibb.co/6HGL8Kk)

(https://i.ibb.co/pLpRjMT/IMG-0456-1.jpg) (https://ibb.co/pLpRjMT)

(https://i.ibb.co/JQq2zv2/IMG-0457-1.jpg) (https://ibb.co/JQq2zv2)
Title: Re: which convertor do I have
Post by: Antietam Classic Cycle on January 26, 2023, 06:56:39 PM
That is the heavy, machined flywheel.
Title: Re: which convertor do I have
Post by: ray bear on January 26, 2023, 07:06:25 PM
Thank you Charlie, so its a good one then
Title: Re: which convertor do I have
Post by: TOMB on January 26, 2023, 07:11:11 PM
Ditto to what Charlie said.

My concert has the same type of flywheel except my flywheel has the starter teeth directly machined on the flywheel, not a separate starter ring--changed years ago.


(https://i.ibb.co/PGS81wc/TOMS-CONVERT.jpg) (https://ibb.co/PGS81wc)



(https://i.ibb.co/3m8NwMR/20210608-165405.jpg) (https://ibb.co/3m8NwMR)


TOMB
Title: Re: which convertor do I have
Post by: John A on January 26, 2023, 08:04:35 PM
Quote from: ray bear on January 26, 2023, 06:54:09 PM
Can some one identify my converter , do I have a good one or bad thanks Ray


(https://i.ibb.co/PFzQf7g/IMG-0454-1.jpg) (https://ibb.co/PFzQf7g)

(https://i.ibb.co/6HGL8Kk/IMG-0455-1.jpg) (https://ibb.co/6HGL8Kk)

(https://i.ibb.co/pLpRjMT/IMG-0456-1.jpg) (https://ibb.co/pLpRjMT)

(https://i.ibb.co/JQq2zv2/IMG-0457-1.jpg) (https://ibb.co/JQq2zv2)





That’s a clean looking Convert!
Title: Re: which convertor do I have
Post by: ray bear on January 26, 2023, 09:02:17 PM
Thanks John, Its  76 that had only 26000 km on the clock when I got it , Teo Lamers brought it in from Italy for me 3 years ago and never missed a beat until the clutch throw out bearing seized the other day  when I pulled the clutch in to back into the kerb the adjuster spun itself all the way out to full adjustment and I had no drive, But thats what wives and trailers are for . I did adjust the clutch when I got the bike but perhaps I didnt do the lock nut up tight enough .

I didnt like the convert silver so I repainted it. Ray


(https://i.ibb.co/0hjgbVZ/IMG-1326.jpg) (https://ibb.co/0hjgbVZ)

(https://i.ibb.co/jg9WPXt/IMG-1282.jpg) (https://ibb.co/jg9WPXt)
Title: Re: which convertor do I have
Post by: bigbikerrick on January 27, 2023, 03:27:02 PM
Very nice paint job, Raybear. I like that fade, very different! :thumb:
Rick.
Title: Re: which convertor do I have
Post by: 80CX100 on January 27, 2023, 04:03:45 PM
I echo BBR's words, that's an awesome looking paint job. :thumb:

Just a WAG,but I'm thinking it was possibly inspired by the old BMW R90S Orange burst?

Very tasty looking bike   :bow: