Author Topic: V85TT info required?  (Read 1053 times)

Offline Bison

  • Hatchling
  • **
  • Posts: 113
Re: V85TT info required?
« Reply #30 on: January 27, 2023, 09:53:07 AM »
Huzo, erudite and correct as ever, thanks.
I measured the stand by putting spacers underneath the foot, it's way too short, I measure 25cm from pivot bolt to foot, straight along the shaft of the stand, when I have it at what I deem to be a close to good angle, I measure 30cm, that's almost 2" it could do with being lengthened!. The pivot bolt has a little play in it, but I mean a little, could be it's going a bit too far forward, but not anywhere near that much. Does anyone know if the Stelvio stand is longer?.
I still have my LM111, so hopefully I will be allowed to stay within the fold?.
Alan.

Offline Vagrant

  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • *
  • *
  • Posts: 1881
  • Location: Gainesville, Ga or Green Valley Az.
Re: V85TT info required?
« Reply #31 on: January 27, 2023, 10:04:06 AM »
Drop the forks a 1/2" . Simpler!
HE IS FREE WHO LIVES AS HE CHOOSES
2016 V7II, 2017 V7-III Blue special, 2022 V85 the fast red one! 2016 650 Versys
L-196, L-197

Offline Bison

  • Hatchling
  • **
  • Posts: 113
Re: V85TT info required?
« Reply #32 on: January 27, 2023, 12:58:28 PM »
Because of the handlebar arrangement on the Norge I don't think it's possible to drop the forks.
Alan.

Online Huzo

  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • Posts: 12244
  • Location: Creswick Australia
Re: V85TT info required?
« Reply #33 on: January 27, 2023, 01:05:57 PM »
Drop the forks a 1/2" . Simpler!
I’d try raising the forks…

Wildguzzi.com

Re: V85TT info required?
« Reply #33 on: January 27, 2023, 01:05:57 PM »

Online Huzo

  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • Posts: 12244
  • Location: Creswick Australia
Re: V85TT info required?
« Reply #34 on: January 27, 2023, 01:23:34 PM »
Huzo, erudite and correct as ever, thanks.
I measured the stand by putting spacers underneath the foot, it's way too short, I measure 25cm from pivot bolt to foot, straight along the shaft of the stand, when I have it at what I deem to be a close to good angle, I measure 30cm, that's almost 2" it could do with being lengthened!. The pivot bolt has a little play in it, but I mean a little, could be it's going a bit too far forward, but not anywhere near that much. Does anyone know if the Stelvio stand is longer?.
I still have my LM111, so hopefully I will be allowed to stay within the fold?.
Alan.
Okay..
Make sure that the plate that your sidestand is bolted to, is still firmly bolted to the engine crankcase.
Also it is prudent to check that your stand is not going too far past the point where the spring overcentres. If it is, it can be cured in the time honoured fashion, by removing the stand and applying a small dab of weld either on the stand or (preferably) on the mounting plate.
Ensure that the pivot bolt is greased and very well tightened, before nipping up the locknut, which seems to be perpetually loose…(I lockwired mine).
BTW.
I have lengthened my Norge sidestand by 30 mm. You COULD lengthen yours by 30 cm as you say, but that seems a touch excessive… :grin: :thumb:
But you’re right, length is important


You can see the extra length and steepened angle in this shot.

Online Huzo

  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • Posts: 12244
  • Location: Creswick Australia
Re: V85TT info required?
« Reply #35 on: January 27, 2023, 01:24:58 PM »
Because of the handlebar arrangement on the Norge I don't think it's possible to drop the forks.
Alan.
Correct, unless you want to machine away the step in the top crown.

Offline Bison

  • Hatchling
  • **
  • Posts: 113
Re: V85TT info required?
« Reply #36 on: January 29, 2023, 04:45:23 PM »
Thanks all,
I'll double check all the stand fastenings tomorrow.
I've taken the plunge and bought a V85TT, looking forward to getting it.
I'll keep my Norge at the moment.
Alan.

Offline twowheeladdict

  • Gaggle Hero
  • *****
  • Posts: 5656
Re: V85TT info required?
« Reply #37 on: January 29, 2023, 05:27:31 PM »
Thanks all,
I'll double check all the stand fastenings tomorrow.
I've taken the plunge and bought a V85TT, looking forward to getting it.
I'll keep my Norge at the moment.
Alan.

 :thumb:
2022 Moto Guzzi V85TT Guardia D'onore
2018 V7 III Carbon Dark #0009 of 1921
2018 Road Glide Special
2021 Kawasaki KLX300SM
2017 Suzuki Van Van 200

Online Huzo

  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • Posts: 12244
  • Location: Creswick Australia
Re: V85TT info required?
« Reply #38 on: January 29, 2023, 08:16:40 PM »
Thanks all,
I'll double check all the stand fastenings tomorrow.
I've taken the plunge and bought a V85TT, looking forward to getting it.
I'll keep my Norge at the moment.
Alan.
Good for you Bison… :thumb:
Please ask a million questions, but start your own thread like “Bison’s Bike” or something and we’ll all know to look for you questions and impressions there.
Should be good.

Offline Bison

  • Hatchling
  • **
  • Posts: 113
Re: V85TT info required?
« Reply #39 on: February 02, 2023, 04:45:21 AM »
Will do Huzo, as soon as I have some input.
Alan.


Harper's Moto Guzzi : Go Ride, Break Parts, Call me!
Harper's Moto Guzzi. Where we still answer the phone, use the highest quality parts, and also do Transmission, rear drive, and carb rebuilds fast. Call us at 816.697.3411 and get your problems resolved.
http://www.harpermoto.com
Advertise Here
 

***Wildguzzi Official Logo High Quality 5 Color Window Decals Back In Stock***
Shipping in USA Only. Awesome quality. Back by popular demand. All proceeds go back into the forum.
http://www.wildguzzi.com/Products/products.htm
Advertise Here