Lowering Norge footpegs

[Huzo]

What is the Goldwing ‘peg replacement solution for the Norge ?

[Guzzidad]

   been a while since I did it but if I remember right they were from a GL series Goldwing and they also needed the correct springs over the pins holding them on. Was definitely worth it.

[Huzo]

   been a while since I did it but if I remember right they were from a GL series Goldwing and they also needed the correct springs over the pins holding them on. Was definitely worth it.

How much lower were they ?

[Guzzidad]

  Wasn't much, maybe 1/2 inch, but they were longer and wider. Much more comfortable.

[dave1068]

This could apply to any bikes pegs but Ive had some used bikes that I bought and noticed the spring popped out and was gone and I just bought an allen head bolt that went thru the whole unit, put on a little blue thread and nut and it was fine. This of course only works if the peg sits in place on its own and doesnt pivot down, Good luck

[PJPR01]

What is the Goldwing ‘peg replacement solution for the Norge ?

Goldwing GL1800 pegs and springs…here’s a set I have waiting to go on if my current set needs replacing.  About 1/2 inch lower, nicely wider and better rubber for vibration than stock pegs.