Author Topic: How to reset Maintenance Required "Wrench Icon" on dash for MGX-21  (Read 3024 times)

Offline jsalazar

  • New Egg
  • *
  • Posts: 14
  • Location: Houston, Texas
After a long trip to Sturgis, South Dakota and back my odometer reached 6214 miles.  At this point the service required indication "Spanner Wrench" symbol popped up on my right display.   This is a normal indication in order to remind you to change the motor oil.  So after some reading here's how to clear the indication.

1. Turn key to the "On" position
2. Using your Modes button on right side handlebar flip thru options until you see "Menu".  Select it
3. Flip through the Menu options until you see "Service". Select it
4. Enter Service Code 34534
5. Flip through options until you see "Reset Coupon". Select it
6. When prompted "Yes" or "No" select Yes
7. Select "Exit"  and you're done.

You will need to do this every 6214 miles.

I would think it's a same procedure for the California 1400CC model due to its similarity to the MGX-21, but not completely sure.


« Last Edit: July 29, 2018, 07:52:04 PM by jsalazar »

pete roper

  • Guest
Re: How to reset Maintenance Required "Wrench Icon" on dash for MGX-21
« Reply #1 on: July 29, 2018, 07:03:23 PM »
I'd think so but it won't do any harm if you insert the wrong code, it will simply default back to the main menu. It will not damage anything.

Pete

Online lucian

  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • *
  • Posts: 3276
  • Location: Maine, Ayuh
Re: How to reset Maintenance Required "Wrench Icon" on dash for MGX-21
« Reply #2 on: July 29, 2018, 08:29:57 PM »
same code on my 14 custom 34534

elvisboy77

  • Guest
Re: How to reset Maintenance Required "Wrench Icon" on dash for MGX-21
« Reply #3 on: July 29, 2018, 08:36:05 PM »
same code on my 14 custom 34534

And my Eldo.

Wildguzzi.com

Re: How to reset Maintenance Required "Wrench Icon" on dash for MGX-21
« Reply #3 on: July 29, 2018, 08:36:05 PM »

Offline LowRyter

  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • Posts: 16511
  • Location: Edmond OK
Re: How to reset Maintenance Required "Wrench Icon" on dash for MGX-21
« Reply #4 on: July 29, 2018, 08:54:00 PM »
sounds better than a Ducati where you have to take it to dealer and have them do it with there equipment.  And hope said dealer has updated their equipment with the current codes, so they won't give you blank looks.

« Last Edit: July 29, 2018, 08:54:47 PM by LowRyter »
John L 
When life gets you down remember it's one down and the rest are up.  (1-N-23456)

Offline bad Chad

  • Gaggle Hero
  • *****
  • *
  • *
  • Posts: 9446
  • Location: Central Il
Re: How to reset Maintenance Required "Wrench Icon" on dash for MGX-21
« Reply #5 on: July 29, 2018, 08:56:18 PM »
I just leave mine on.  Shrug
2007 Breva 1100  Red Arrow (and faster than yours!)
2016 CSC 250TT Zongshen
2017 V9 Roamer

Offline moto-uno

  • Gaggle Hero
  • *****
  • *
  • Posts: 1344
  • Location: Burnaby , B.C
Re: How to reset Maintenance Required "Wrench Icon" on dash for MGX-21
« Reply #6 on: September 05, 2020, 01:28:20 PM »
  I'd like to confirm that this works on my 2018 Eldorado . Takes a few times , as it's not all that intuitive YMMV .  Peter

Offline Jorg66

  • Gosling
  • ***
  • *
  • *
  • *
  • *
  • Posts: 223
  • Location: Shoal Lake, Manitoba
Re: How to reset Maintenance Required "Wrench Icon" on dash for MGX-21
« Reply #7 on: September 05, 2020, 02:39:26 PM »
34534,.... thats the one.
Now 2019 California ,,2018 [ New] V7 III Carbon Dark
Ex  1979 Kreidler Florett, 1980 Z 550 , 1969Nuovo Falcone/ Polizzia,2006 VTX 1300 C ,1982 Honda CB 125 S

Offline Kiwi Dave

  • Gaggle Hero
  • *****
  • *
  • Posts: 1421
    • Guzzi Gander Ltd
  • Location: Auckland, New Zealand
Re: How to reset Maintenance Required "Wrench Icon" on dash for MGX-21
« Reply #8 on: September 05, 2020, 04:19:56 PM »
I am the guilty one that cracked that code, and told the world.  Now newer models such as my V7-III Stone, and my V85-TT can only be reset by a registered dealer.  I wouldn't mind, but they overcharge for this simple task.

I doubt I'll be buying any more MG models (but I have said that before).

Offline bighand

  • New Egg
  • *
  • Posts: 4
  • Location: kaukauna wis
Re: How to reset Maintenance Required "Wrench Icon" on dash for MGX-21
« Reply #9 on: October 19, 2021, 05:19:24 PM »
Good job Dave

Offline bighand

  • New Egg
  • *
  • Posts: 4
  • Location: kaukauna wis
Re: How to reset Maintenance Required "Wrench Icon" on dash for MGX-21
« Reply #10 on: October 19, 2021, 06:38:16 PM »
My Norge needed 28315 to reset wrench icon

 

Crusty Cycle, Vintage Moto Guzzi Parts
Ambassador, Eldorado, 850T, T3, 1000SP, G5, Convert, etc. Good Prices - Fast Shipping
http://www.crustycycle.com
Advertise Here