Author Topic: Disk Front brake line length - v7 sport  (Read 619 times)

Offline 1down5up

  • Hatchling
  • **
  • *
  • *
  • *
  • *
  • *
  • Posts: 178
  • Location: Sydney NSW Australia
Disk Front brake line length - v7 sport
« on: March 27, 2020, 02:12:04 AM »
All, had a search but didn't turn up anything.

I'm rebuilding a particularly ratty lm2 into a V7 sport clone and am hoping someone can help me with brake line length for twin disks (front mount callipers), along with line length from the rear m/c to the rear caliper(no hard line, braided hose all the way)

Anyone with a tonti with delinked front brakes and clipons have a length?

Offline 1down5up

  • Hatchling
  • **
  • *
  • *
  • *
  • *
  • *
  • Posts: 178
  • Location: Sydney NSW Australia
Re: Disk Front brake line length - v7 sport
« Reply #1 on: March 27, 2020, 02:47:17 PM »
'73/'74 Sport. Length of original brake lines. Center of banjo bolt hole to center of opposite end banjo bolt hole. Master cyl. to manifold:12 3/8". Manifold to each caliper: 19 5/16". Horst.

Thanks alot for your reply, just to confirm.

Your set up is single line to a manifold splitter, then twin lines down to the callipers (on front of forks).


Harper's Moto Guzzi : Go Ride, Break Parts, Call me!
Harper's Moto Guzzi. Where we still answer the phone, use the highest quality parts, and also do Transmission, rear drive, and carb rebuilds fast. Call us at 816.697.3411 and get your problems resolved.
http://www.harpermoto.com
Advertise Here
 


Harper's Moto Guzzi : Go Ride, Break Parts, Call me!
Harper's Moto Guzzi. Where we still answer the phone, use the highest quality parts, and also do Transmission, rear drive, and carb rebuilds fast. Call us at 816.697.3411 and get your problems resolved.
http://www.harpermoto.com
Advertise Here