Author Topic: Timing Chain Tensioner CARC 2 Valves  (Read 2435 times)

Offline skippy

  • Gaggle Mentor
  • ****
  • Posts: 729
Re: Timing Chain Tensioner CARC 2 Valves
« Reply #30 on: June 15, 2021, 08:19:08 AM »
Huzo,

I didn't actually measure the backlash so I have no value to give you for reference. Joe didn't provide an expected value either. After assembly, I did roll the motor over a few times slowly by hand to be sure there was no binding due to minute variations one would expect but discovered nothing but a smooth consistent movement.

I did the assembly with a very light coat of STP on the gear teeth applied with a horse hair brush just to give me a warm fuzzy feeling that there would be adequate lubrication until the first start.

The hardest part of the whole process was fitting the oil pump gear with it's devilish little ass key.

Skippy
23 V100 Mandello
20 V85TT

Offline Huzo

  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • *
  • Posts: 13202
  • Location: Creswick Australia
Re: Timing Chain Tensioner CARC 2 Valves
« Reply #31 on: June 15, 2021, 08:49:32 AM »
...with it's devilish little ass key
’Sounds painful, but I’ll try mine when I’m in there... :thumb:
But seriously...
Thanks for the info Skippy, I am keen to get my Norge up in the stirrups for a “gentle prod...”

***Wildguzzi Official Logo High Quality 5 Color Window Decals Back In Stock***
Shipping in USA Only. Awesome quality. Back by popular demand. All proceeds go back into the forum.
http://www.wildguzzi.com/Products/products.htm
Advertise Here
 

***Wildguzzi Official Logo High Quality 5 Color Window Decals Back In Stock***
Shipping in USA Only. Awesome quality. Back by popular demand. All proceeds go back into the forum.
http://www.wildguzzi.com/Products/products.htm
Advertise Here