New 20 ounce tumblers available now! Forum donation credit with purchase. https://www.wildguzzi.com/Products/products.htm#Tumbler
... I bet the prices on these pieces will make your eyes water tho
The Nightpack headlight looks to be a different size and would not fit into the existing mount. Plus $$$$$$. There is a drop in LED headlight that fit the V7, LED signals are easily sourced (I'm looking at Yoshimura's myself) and the GTM tail tidy kit can be ordered with an LED brake light.
The problem is - in Ohio the law specifically states the lamp illuminating the license must be white. So now I need to add a white LED strip to the bottom surface of the tail light
I changed my tail/brake light to red LED. Since the license plate is illuminated by the tail bulb it lights up red, too. I thought GREAT! Itís more surface area to light up red when I brake. The problem is - in Ohio the law specifically states the lamp illuminating the license must be white. So now I need to add a white LED strip to the bottom surface of the tail light lense. Dang picky laws.
Another option is what I did on the convert. On eBay I bought a Jeep LED 7-inch headlight bulb went right into the housing. Was $44 for two units. They also have a LED Halo on the outer perimeter of the bulb that can be white or yellow. Amazon and eBay are your friends.
Steve how did those headlights work out. In the Jeep community a lot of people report problems with the cheap/amazon LED lights.Many are blinding to oncoming traffic because there's no clean cut-off and you can really aim/focus them down/away.Others simply report early failures or other problems.
Pacman, that holley light does look like a quality piece for less that what I see on the other big store websites. I think I'm going to try this firsthttps://www.amazon.com/gp/aw/d/B07T28C69B/ref=ox_sc_act_image_2?smid=A1NMB1N6XMXP55&psc=1I'm not confident in the longevity but it is inexpensive and I'd like to try the turn signal integration. If it doesn't work out I'll likely try the holley one nextI also plan to install thesehttps://www.amazon.com/gp/aw/d/B08GS4QTZN/ref=ox_sc_act_image_4?smid=A1NMB1N6XMXP55&psc=1I'm ordering today so I'll update on how they all work in a few days
Well the Zmoon arrived yesterday and it was a fit failure in the stock housing. The diameter of the replacement light was just a tiny bit smaller than the stock and therefore needs a gasket of some sort to keep it centered in the outer ring of the headlight bucket. Additionally there are no screw holes on the replacement and therefore no way to secure it to either the outer ring or to the housing itself. The wiring was straight forward, but it just didn't fit. I will be sending it back.I think I am going to skip the night pack look at this time and simply get a brighter replacement bulb like the one below and keep the stock reflector and outer lens which fit properly and have the ability to adjust the direction of the beam.https://www.amazon.com/Piaa-15214-Xtreme-White-Plus/dp/B00067BVR8/ref=sr_1_4?crid=1YCBX7ABNDTOQ&keywords=piaa+extreme+plus+h4&qid=1653394430&sprefix=piaa+extreme+plus+h4%2Caps%2C130&sr=8-4
Page created in 0.023 seconds with 24 queries.