Author Topic: 08 Norge Brake Master Cylinder Rebuild Kit Number Needed  (Read 326 times)

Online cappisj1

  • Gosling
  • ***
  • *
  • *
  • Posts: 286
  • Location: Illinois
08 Norge Brake Master Cylinder Rebuild Kit Number Needed
« on: February 06, 2023, 07:31:36 PM »
There is no listed part number for a rebuild/plunger kit for the Norge. My clutch master cylinder gave up last fall. Found a kit from Europe and that is fine. So yesterday the brake master cylinder started leaking. MG cycle said to ask around to see is someone knows. Even is someone knows the plunger size I could find the right kit. Or even tell what to measure to know the size. The clutch is 11.9mm.

Thanks.
« Last Edit: February 06, 2023, 10:10:22 PM by cappisj1 »

Offline Paul_Tim

  • New Egg
  • *
  • *
  • Posts: 43
Re: 08 Norge Brake Master Cylinder Rebuild Kit Number Needed
« Reply #1 on: February 07, 2023, 03:59:02 AM »

Offline guzzisteve

  • Gaggle Hero
  • *****
  • *
  • Posts: 11424
  • "Just Ride It"
Re: 08 Norge Brake Master Cylinder Rebuild Kit Number Needed
« Reply #2 on: February 07, 2023, 09:49:38 AM »
Front brake master should have the part # for Brembo on it, use this # to get parts. There is a US distributor, others to sell parts.
Here is another I have got from

https://www.bellissimoto.com/

If you have to buy a new master upgrade to a radial, they have a bleeder on the master usually.

Found this, you have to measure which one was used,

https://www.wemoto.com/parts/picture/is-brembo11-9

I've also read it's not rebuildable, I haven't done one.

https://addictionmotorsport.co.uk/brembo-replacement-parts/brembo-13mm-master-cylinder-repair-kit-ducati-aprilia-ktm-110436250
« Last Edit: February 07, 2023, 10:23:44 AM by guzzisteve »
"Pray through Carlo & your bike shall be healed"
Location: Planet Earth

Online cappisj1

  • Gosling
  • ***
  • *
  • *
  • Posts: 286
  • Location: Illinois
Re: 08 Norge Brake Master Cylinder Rebuild Kit Number Needed
« Reply #3 on: February 07, 2023, 10:56:43 AM »
The wemoto part Brake and Clutch Master Cylinder Repair Kit Front - Brembo 11.9mm [AA0557] is what I used for the clutch side. The brake is a larger unit on the outside at least.

I can’t believe the master cylinder was only built and used on the Norge. There has to be a kit for it.

I will email these links and see if they know what will cross reference over.

Wildguzzi.com

Re: 08 Norge Brake Master Cylinder Rebuild Kit Number Needed
« Reply #3 on: February 07, 2023, 10:56:43 AM »

Offline guzzisteve

  • Gaggle Hero
  • *****
  • *
  • Posts: 11424
  • "Just Ride It"
"Pray through Carlo & your bike shall be healed"
Location: Planet Earth

 

20 Ounce Stainless Steel Double Insulated Tumbler
Buy a quality tumbler and support the forum at the same time!
Better than a YETI! BPA and Lead free.
Advertise Here