New 20 ounce tumblers available now! Forum donation credit with purchase. https://www.wildguzzi.com/Products/products.htm#Tumbler
if you push the pistons all the way out (into the caliper half) before you bleed, there is no room for air for the dual bleeders to bleed. Get a bleeding banjo bolt and be done with it. If you do not like the look of the broken bleeder screw, use some RTV and glue the brembo rubber bleeder cover over the broken bleeder, and it will hide the unsightly evidence of your boo boo...
Do you have the "L" bracket that mounts the fairing lower edge to the lower triple clamp? The fairing should be pretty solid with all three mounts.I'm having the same problem with my throttle cables. There seems to be no smooth way to route them.