General Category > General Discussion
Brrrrr winter. Whatcha working on ?
Stevex:
Honda CB1300. Just finished refitting the cams after changing/swopping 14 out of 16 under bucket shims. All engine covers off for Cerakote coatings. Exhaust off for cleaning and I've just re sprayed the radiator with rad paint.
Triumph Bonneville SE. Valve gaps checked and all found virtually spot on. Exhaust off for cleaning.
Gino:
Just got round to Stripping for a cosmetic resto of a spada mk3 , very unloved when I bought it almost 3 years ago. I was going to build it as a special but it’s a good bike under the muck so it’s going back to original.
It’s only done 22k miles and the more I looked at it I realised it was too good to trash.
Waiting on parts back from the powder Coaters the it will be rebuild time
Antietam Classic Cycle:
Still working on the "1200 Ambassador" (Norge engine in '71 Ambassador chassis) and '73 Eldo for customers. Morini 3 1/2 Sport waiting for a lift to come open, so that I can reassemble it. There's a "barn find" '73 Eldo coming around the 1st of the year for me to "make run".
Personal projects: In the parts collecting stage of building a CX100, and later in Winter will make the free V65SP roadworthy. Still need to find out why the Morini 3 1/2 is smoking from the rear cylinder. Hoping to find someone local that does dry ice blasting and have them do the Ducati Pantah engine so that I can finally make some progress on that.
Some of the CX100 parts.
The free V65, Pantah engine peeking out from behind it.
Scout63:
Hello Everyone. It’s been a while. I’m re-lacing the rear wheel on my Commando while my v7 Sport engine rebuild sideeyes me. I’m also installing a new outboard and rigging on my skiff.
Dukedesmo:
Ongoing (AKA never-ending) rebuild of my old Land Rover.
Spent the last year or so fixing up the chassis and running gear, just last week finished (well almost) the engine, still needs an exhaust though.
Endless list of things to do, pondering over the bodywork now which actually looks worse than it is (mostly Aluminium so not rusty) due to the crusty paint, not something I'm looking forward to as I'm more into the mechanical side of things but, hoping to be finished next year...
Starting point;
Current state;
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version