Author Topic: Aero engine rescue  (Read 398560 times)

Online blackcat

  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • *
  • Posts: 8854
  • Location: USA
Aero engine rescue
« on: October 26, 2013, 09:31:01 PM »
For sale. Price seems reasonable considering it is new.

http://montgomery.craigslist.org/mcy/4118261486.html
1968 Norton Fastback
1976 Lemans
1981 CX-100
1993 1000S
1997 Daytona RS
2007 Red Norge

Offline Shorty

  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • *
  • *
  • Posts: 3519
  • "I'd rather lube a chain than crab a frame."
  • Location: Oklahoma
Re: Aero engine rescue
« Reply #1 on: October 27, 2013, 01:28:49 AM »
Small airboat mill?  ;-T
2017 Suzuki DR650
2021 Royal Enfield Meteor 350

wildduck

  • Guest
Re: Aero engine rescue
« Reply #2 on: October 27, 2013, 01:46:26 AM »

http://en.wikipedia.org/wiki/IAI_RQ-5_Hunter

early unmanned flying machine,

John

Offline Unkept

  • Gaggle Hero
  • *****
  • Posts: 2206
    • Unkept Uncaged- Youtube Channel
Re: Aero engine rescue
« Reply #3 on: October 27, 2013, 07:29:59 AM »
Someone buy this and make the $#!* Ippo!


Wildguzzi.com

Re: Aero engine rescue
« Reply #3 on: October 27, 2013, 07:29:59 AM »

Offline LowRyter

  • Gaggle Hero
  • *****
  • *
  • *
  • Posts: 16685
  • Location: Edmond OK
Re: Aero engine rescue
« Reply #4 on: October 27, 2013, 09:20:40 AM »
IIRC the drone engine is 750cc 4 valve per cyl design
John L 
When life gets you down remember it's one down and the rest are up.  (1-N-23456)

Offline Unkept

  • Gaggle Hero
  • *****
  • Posts: 2206
    • Unkept Uncaged- Youtube Channel
Re: Aero engine rescue
« Reply #5 on: October 27, 2013, 09:29:20 AM »
IIRC the drone engine is 750cc 4 valve per cyl design

Actually it is supposed to be a 2 valve per cylinder design, but with Hemi head/piston design. It was claimed to produce around 63hp as well.

Offline Chuck in Indiana

  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • Posts: 29445
Re: Aero engine rescue
« Reply #6 on: October 27, 2013, 09:46:45 AM »
I don't know why I'm not headed to Birmingham as we speak. Too many projects, too little time. :(
Chuck in (Elwood) Indiana/sometimes SoCal
 
87 AeroLario
95 Skorpion tour
22 Royal Enfield Classic 3 fiddy
 "Two things are infinite: the universe and human stupidity; and I'm not sure about the universe."
Albert Einstein

Offline Unkept

  • Gaggle Hero
  • *****
  • Posts: 2206
    • Unkept Uncaged- Youtube Channel
Re: Aero engine rescue
« Reply #7 on: October 27, 2013, 09:49:52 AM »
I don't know why I'm not headed to Birmingham as we speak. Too many projects, too little time. :(

Maybe "I" have less projects and more time than you do Chuck (how is that possible?)! I just don't have the money.

So feel free to head down to Birmingham, pick up the mill for me, and I'll take care of the rest!  ;D

Could take me awhile to figure things out though... I'd need a lot of parts to complete a project around that engine.

This same engine has been up for sale before, somebody here needs to rescue it.


Offline Pfaff!

  • Gaggle Hero
  • *****
  • Posts: 6538
  • "Lasciate ogni speranza voi ch'entrate"
Re: Aero engine rescue
« Reply #8 on: October 27, 2013, 10:03:35 AM »
Someone buy this and make the $#!* Ippo!



 ;-T :+1
Anders Holt

Breva V 750 ie "Rossinante" '03. Running fine ever since. Sold.
Pushing bikes these days.

"El camino amigo, el camino y nada mas"

Offline Chuck in Indiana

  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • Posts: 29445
Re: Aero engine rescue
« Reply #9 on: October 27, 2013, 12:04:02 PM »
I'm thinking more like putting it in this..



although a new 750 lump in the Lario would look good, too. Just the same, both would be projects, (the Lario not so much)  I'm going through the Strada this winter, and unfortunately.. w w w work is picking up. ;)
Chuck in (Elwood) Indiana/sometimes SoCal
 
87 AeroLario
95 Skorpion tour
22 Royal Enfield Classic 3 fiddy
 "Two things are infinite: the universe and human stupidity; and I'm not sure about the universe."
Albert Einstein

Offline LowRyter

  • Gaggle Hero
  • *****
  • *
  • *
  • Posts: 16685
  • Location: Edmond OK
Re: Aero engine rescue
« Reply #10 on: October 27, 2013, 02:16:11 PM »
fly in to the Ponca City airport for the mexican food.   :P
John L 
When life gets you down remember it's one down and the rest are up.  (1-N-23456)

Offline Dogwalker

  • Gaggle Mentor
  • ****
  • Posts: 834
Re: Aero engine rescue
« Reply #11 on: October 27, 2013, 02:43:00 PM »
As said, the V75 Hi.e is a V75 with hemi heads, almost identical to those of the big block, is evident the advantage in the diameter of the valves.




« Last Edit: October 27, 2013, 02:45:05 PM by Dogwalker »

Offline gusanito

  • Gosling
  • ***
  • Posts: 332
Re: Aero engine rescue
« Reply #12 on: October 27, 2013, 04:59:49 PM »
The ad has been on CL for a few months, every time I do a search for Guzzi, it comes up.
A few years ago there was another one for sale out of Dothan, Al. I think. Ft. Rucker is just up the road.
Quincy, Fl

Offline FGO

  • Gaggle Hero
  • *****
  • Posts: 2605
Re: Aero engine rescue
« Reply #13 on: October 27, 2013, 06:23:49 PM »
If I recall Ed Milich had a funky cam from a drone engine and mentioned they ran in a reverse direction to the motorcycle engine, this could make a first ride interesting.....
Jon

Offline pyoungbl

  • Gaggle Hero
  • *****
  • *
  • Posts: 1980
Re: Aero engine rescue
« Reply #14 on: October 27, 2013, 07:22:01 PM »
As said, the V75 Hi.e is a V75 with hemi heads, almost identical to those of the big block, is evident the advantage in the diameter of the valves.


Man, this hemi head design looks like it is begging for a V7 Stelvio.  That's the missing ingredient for a competitive 750cc machine. 
Growing old ain't for sissies.

'13 V7 Special (red/white)

Offline LowRyter

  • Gaggle Hero
  • *****
  • *
  • *
  • Posts: 16685
  • Location: Edmond OK
Re: Aero engine rescue
« Reply #15 on: October 27, 2013, 07:25:24 PM »
so why is the Heron on the V7 vs Hemi?
John L 
When life gets you down remember it's one down and the rest are up.  (1-N-23456)

Offline Murray

  • Gaggle Hero
  • *****
  • Posts: 3048
Re: Aero engine rescue
« Reply #16 on: October 27, 2013, 07:46:03 PM »
so why is the Heron on the V7 vs Hemi?

Cheaper to manufacture.

Offline Dogwalker

  • Gaggle Mentor
  • ****
  • Posts: 834
Re: Aero engine rescue
« Reply #17 on: October 27, 2013, 08:54:28 PM »
If you double every dimension of a cylinder, the cross section of the valves increase 4 times, but the volume to fill increase 8 times.
In the original V35/V50 the cylinder was small enough than the dimension of the valves of the heron head was enough to fill it without problems, and the heron head, with the tecnology of the time, was way more economical (the tools had to work in only one direction). But, as the displacement increased, the heron heads were no more adequate, also because the 80X74 V75 is a long stroke (and so, small bore) engine compared to the 66X50.6 V35, so the valves are comparatively smaller. Bigger cross sections of the valves, and so the hemi heads, or the 4V heads, are needed to keep it competitive (infact, the V75 was born with the 4V heads).
Why it has heron heads in 2013, only the Gods know...

Offline lucky phil

  • Gaggle Hero
  • *****
  • Posts: 2047
Re: Aero engine rescue
« Reply #18 on: October 28, 2013, 12:54:45 AM »
Totally unsuitable for a manned aircraft the way it's shown there. Those heads dont have dual plugs,dual ignition is a must for a manned aircraft.
Ciao
If you're not living on the edge you're taking up to much room.

Offline Chuck in Indiana

  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • Posts: 29445
Re: Aero engine rescue
« Reply #19 on: October 28, 2013, 08:05:16 AM »
Does anyone have a close up picture of this engine? I've been searching, but haven't found a detailed picture..
Chuck in (Elwood) Indiana/sometimes SoCal
 
87 AeroLario
95 Skorpion tour
22 Royal Enfield Classic 3 fiddy
 "Two things are infinite: the universe and human stupidity; and I'm not sure about the universe."
Albert Einstein

Offline Dogwalker

  • Gaggle Mentor
  • ****
  • Posts: 834
Re: Aero engine rescue
« Reply #20 on: October 28, 2013, 08:20:34 AM »
Apart for the hemi heads, the pistons, a dedicated camshaft, and an extended sump, the engine is a standard V75. In the Ippogrifo it was coupled with the (will be) gearbox of the V11.

http://s16.postimg.org/6syix5uid/visita_museo_guzzi_084.jpg
http://s16.postimg.org/grjhjn3xx/visita_museo_guzzi_083.jpg
http://s7.postimg.org/y7cbgfti3/Hunter_Ippo_mill.jpg
http://s9.postimg.org/c86yuk9gf/Hunter_Ippo_2.jpg

Offline Unkept

  • Gaggle Hero
  • *****
  • Posts: 2206
    • Unkept Uncaged- Youtube Channel
Re: Aero engine rescue
« Reply #21 on: October 28, 2013, 08:26:07 AM »
Apart for the hemi heads, the pistons, a dedicated camshaft, and an extended sump, the engine is a standard V75. In the Ippogrifo it was coupled with the (will be) gearbox of the V11.


If somebody bought the engine in Alabama, they should disassemble it and get those individual parts scanned... that way they would have a 3D backup of each piece, could make replacement parts if necessary, and maybe they could share that information with other small block owners so they could make their own "hemi" small blocks!  ;-T

Offline Chuck in Indiana

  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • Posts: 29445
Re: Aero engine rescue
« Reply #22 on: October 28, 2013, 11:01:07 AM »
Thanks for the pix, Dogwalker. I'm having a tough time deciding if I want to deal with the issues of converting it to put in the Lario. Do you happen to know what compression ratio it is?
Chuck in (Elwood) Indiana/sometimes SoCal
 
87 AeroLario
95 Skorpion tour
22 Royal Enfield Classic 3 fiddy
 "Two things are infinite: the universe and human stupidity; and I'm not sure about the universe."
Albert Einstein

Online rocker59

  • Global Moderator
  • Gaggle Hero
  • *
  • *****
  • *
  • *
  • *
  • *
  • *
  • Posts: 24009
  • "diplomatico di moto"
  • Location: NW Arkansas
Re: Aero engine rescue
« Reply #23 on: October 28, 2013, 11:12:46 AM »
  I'm having a tough time deciding if I want to deal with the issues of converting it to put in the Lario. 

Do it!  Do it!  Do it!
Michael T.
Aux Arcs de Akansea
2004 California EV Touring II
"Do what you can, with what you have, where you are." - Theodore Roosevelt

Offline Unkept

  • Gaggle Hero
  • *****
  • Posts: 2206
    • Unkept Uncaged- Youtube Channel
Re: Aero engine rescue
« Reply #24 on: October 28, 2013, 11:21:23 AM »
Do it!  Do it!  Do it!

Group pressure, come on WG! Unite to get Chuck to buy this thing! ;)

I'm driving down to see it the minute it's in the Guzzi Garage™

Offline Dogwalker

  • Gaggle Mentor
  • ****
  • Posts: 834
Re: Aero engine rescue
« Reply #25 on: October 28, 2013, 11:28:28 AM »
Do you happen to know what compression ratio it is?
9.75/1. Is a bit low since, for military use, the engine was designed to function wit low grade fuel. With this spec, the engine is claimed to have +31.25% power and +10.6 torque over a standard  V75 2V.

Offline Chuck in Indiana

  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • Posts: 29445
Re: Aero engine rescue
« Reply #26 on: October 28, 2013, 12:09:48 PM »
9.75/1. Is a bit low since, for military use, the engine was designed to function wit low grade fuel. With this spec, the engine is claimed to have +31.25% power and +10.6 torque over a standard  V75 2V.

Sounds good. I was afraid of it possibly having super high compression to run on 100 octane or even 130 (!) No computer with it. The guy is going to send me some pictures tonight.
Chuck in (Elwood) Indiana/sometimes SoCal
 
87 AeroLario
95 Skorpion tour
22 Royal Enfield Classic 3 fiddy
 "Two things are infinite: the universe and human stupidity; and I'm not sure about the universe."
Albert Einstein

oldbike54

  • Guest
Re: Aero engine rescue
« Reply #27 on: October 28, 2013, 12:35:29 PM »
Do it!  Do it!  Do it!
:+1 C'mon Chuck , be a hero .
Dusty

Offline Zoom Zoom

  • Gaggle Hero
  • *****
  • Posts: 10519
Re: Aero engine rescue
« Reply #28 on: October 28, 2013, 12:46:15 PM »
Thanks for the pix, Dogwalker. I'm having a tough time deciding if I want to deal with the issues of converting it to put in the Lario. Do you happen to know what compression ratio it is?

Leave the Lario with its original motor. THEN, rig up the additional motor on the back with a pusher prop! Finally, hang on. ;D

John Henry

Offline Unkept

  • Gaggle Hero
  • *****
  • Posts: 2206
    • Unkept Uncaged- Youtube Channel
Re: Aero engine rescue
« Reply #29 on: October 28, 2013, 12:49:42 PM »
:+1 C'mon Chuck , be a hero .
Dusty

 :+1

I'll volunteer to be a pair of hands if you need any help disassembling, reverse-engineering, or staring at the Hemi aero engine once you've got it in your garage Chuck.

I'm not a great mechanic, but I can hold your beer and bring food, etc.  ;D

I'd be a part of Moto Guzzi history, as wouldn't you be the first person (besides maybe the factory for the prototype Ippo) to put the drone engine on a bike?

-Joe

 

Quad Lock - The best GPS / phone mount system for your motorcycles, no damage to your cameras!!
Get a Wildguzzi discount of 10% off your order!
http://quadlock.refr.cc/luapmckeever
Advertise Here