General Category > General Discussion

850T, T3, Convert, G5 Front Fenders

(1/1)

Groover:
Are the front fenders from the 850T, T3, Convert, and G5 all the same? From photos online I think they are, but maybe the 850T is shorter on the front side?

fotoguzzi:
I think your right the T differs slightly.

Moto:
The T and T3 fenders do have different part numbers: 17 43 44 00 and 17 43 44 50, respectively. Don't know how they differ.

The V7 Sport carries the same number as the T, by the way.

Groover:
Ok, thanks for the replies. That confirms what I was noticing about the T. The difference (from what it looks like to me) is that the T looks shorter on the front side (ahead of the forks), but the tail looks longer (behind the fork) - almost as if the fender were rotated slightly if looking at if from the side.

Thanks again.

jbell:
The front brace can be different, also.  The front brace has two mounting bolts on either side, depending on the fork lowers, these can go horizontally or vertically.

Navigation

[0] Message Index