Author Topic: need help putting a price on unobtanium parts (Read 6488 times)

amamet · « **on:** May 10, 2015, 01:38:40 PM »

lent a friend a set of lemans 1 footpegs, brackets with heel guards, linkages and shifters, the whole 9 yards. he said he would replace them now he says name a price for them. anyone have an idea where to start?, anyone want to sell theirs. this person has the money to pay the right price. i also would rather not get piece by piece if possible
thx
allen

image by amamet, on Flickr

NCAmother · « **Reply #1 on:** May 10, 2015, 02:34:48 PM »

Those are pretty rare, and would be hard to find if he wanted to sell his lemans. With that said, I guess eBay?

mtiberio · « **Reply #2 on:** May 10, 2015, 03:03:12 PM »

tell him $650. last time the shift lever was available, it was $65.

Perazzimx14 · « **Reply #3 on:** May 10, 2015, 03:13:47 PM »

Quote from: mtiberio on May 10, 2015, 03:03:12 PM

tell him $650. last time the shift lever was available, it was $65.

....and a bottle of good Scotch ;-T

Wildguzzi.com · « **Reply #3 on:** May 10, 2015, 03:13:47 PM »

Antietam Classic Cycle · « **Reply #4 on:** May 10, 2015, 05:07:28 PM »

Just the brake pedal is 160.75 Euros on Stein-Dinse:

http://www.stein-dinse.biz/Complete-partlist/Nicht-mehr-lieferbar/Pedale-di-comando::138545.html

Late to the party · « **Reply #5 on:** May 10, 2015, 05:22:44 PM »

What is the market price on Unobtainium parts these days?

atavar · « **Reply #6 on:** May 10, 2015, 05:24:53 PM »

Quote from: Late to the party on May 10, 2015, 05:22:44 PM

What is the market price on Unobtainium parts these days?

How much money do you have?
Trade him for that good thing he has that you want..

blackcat · « **Reply #7 on:** May 10, 2015, 05:25:18 PM »

I guess it would be wise for me to hang onto those parts.

Late to the party · « **Reply #8 on:** May 10, 2015, 05:38:27 PM »

Quote from: blackcat on May 10, 2015, 05:25:18 PM

I guess it would be wise for me to hang onto those parts.

Uh... yes?

Perazzimx14 · « **Reply #9 on:** May 10, 2015, 06:22:28 PM »

Quote from: Late to the party on May 10, 2015, 05:38:27 PM

Uh... yes?

But unless you are gonna use or sell those parts they are worthless.

canuguzzi · « **Reply #10 on:** May 10, 2015, 07:40:10 PM »

Does your friend browse the web? He might be reading this thread.

Kent in Upstate NY · « **Reply #11 on:** May 10, 2015, 07:44:24 PM »

Agostini has this. 300 give or take a Euro or two.

mtiberio · « **Reply #12 on:** May 10, 2015, 07:45:39 PM »

I see the shift lever has been damaged anbd crudely repaired...

I used to hoard parts, then I decided I'd sell them, and if I need them later I'll buy them at the prevailing price on ebay. Made me some cash, and made space in my garage. Haven't regreted selling a single part.

amamet · « **Reply #13 on:** May 10, 2015, 08:04:45 PM »

He may read these threads, don't think I said anything negative. I have agostinis on the bike but I want the originals back too

Two Checks · « **Reply #14 on:** May 11, 2015, 04:13:03 AM »

If they are unobtanium you can't buy them as they don't exist!

dsrdave · « **Reply #15 on:** May 11, 2015, 05:24:10 AM »

I've got a pair of pegs, brackets and guards. Nothing of the shift/brake parts extra.

lrutt · « **Reply #16 on:** May 11, 2015, 06:51:05 AM »

wow, didn't realize those bits were so valuable.

They really aren't that impressive looking, and no matter how you put things together on an LM1, the brake pedal wants to foul the exhaust unless you adjust it up quite high.

amamet · « **Reply #17 on:** May 11, 2015, 06:54:31 AM »

Thx Dave , but I think you emailed me a while ago that the heel guards were off a cx100. Am I right or am I mixing up my emails?
Allen

amamet · « **Reply #18 on:** May 11, 2015, 06:59:39 AM »

No there not that impressive but as afar as valuable it's like the side stand on my 74 Ducati 750gt, useless, dangerous POS, but it you want one for your bike it's going to cost you over $200. I guess it's about having as much of the correct stock pieces

mtiberio · « **Reply #19 on:** May 11, 2015, 07:19:34 AM »

Quote from: lrutt on May 11, 2015, 06:51:05 AM

wow, didn't realize those bits were so valuable.

They really aren't that impressive looking, and no matter how you put things together on an LM1, the brake pedal wants to foul the exhaust unless you adjust it up quite high.

you bend it outward, which of course cracks the chrome...

dsrdave · « **Reply #20 on:** May 11, 2015, 07:40:26 AM »

I'm pretty sure I have the heel guards off a CX or LM 1.

amamet · « **Reply #21 on:** May 11, 2015, 08:04:39 AM »

Are the heel guards flat or have raised ridges?

mtiberio · « **Reply #22 on:** May 11, 2015, 11:26:47 AM »

early sp had the same heel guards.

Arizona Wayne · « **Reply #23 on:** May 11, 2015, 11:54:11 AM »

I'll bet the LM1, LMII, CX100 linkage/parts are all the same. These look just like my `81 CX has. ;)

News:

Author Topic: need help putting a price on unobtanium parts (Read 6488 times)

Wildguzzi.com

canuguzzi