Author Topic: Trident parts, Tulsa CL 150 bucks  (Read 741 times)

Offline Shorty

  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • *
  • *
  • Posts: 3524
  • "I'd rather lube a chain than crab a frame."
  • Location: Oklahoma
2017 Suzuki DR650
2021 Royal Enfield Meteor 350

oldbike54

  • Guest
Re: Trident parts, Tulsa CL 150 bucks
« Reply #1 on: April 29, 2019, 09:58:50 AM »
 Wonder what they were planning on doing with that plumbing pipe ? :shocked:  :laugh:

 Dusty

Offline Shorty

  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • *
  • *
  • Posts: 3524
  • "I'd rather lube a chain than crab a frame."
  • Location: Oklahoma
Re: Trident parts, Tulsa CL 150 bucks
« Reply #2 on: April 29, 2019, 10:43:55 AM »
Wonder what they were planning on doing with that plumbing pipe ? :shocked:  :laugh:

 Dusty

Make a travois to get the bike back to the main wigwam?     :laugh:  :wink:
2017 Suzuki DR650
2021 Royal Enfield Meteor 350

Offline bodine99

  • Gosling
  • ***
  • Posts: 400
  • Location: Cecil GA.
Re: Trident parts, Tulsa CL 150 bucks
« Reply #3 on: April 30, 2019, 09:36:20 AM »
lot of good parts there for the $$$$

Wildguzzi.com

Re: Trident parts, Tulsa CL 150 bucks
« Reply #3 on: April 30, 2019, 09:36:20 AM »

Rough Edge racing

  • Guest
Re: Trident parts, Tulsa CL 150 bucks
« Reply #4 on: April 30, 2019, 09:49:32 AM »
 A big problem with Tridents is oil pressure....If it falls much below 75 psi at speed the result is usually a thrown rod or spun rod bearing..The former usually writes off the crankcase, the later usually ruins the crank  if the rod isn't on the outside..Very few use oil pressure gauges...The early 5 speeds also had reliability issues and gears are very expensive....A Trident missing the engine side cover and other parts may be such a case, blowed up and stripped of parts ....In general the engines are very fussy to assemble ...But done right and with $$ they are nice period piece and arguably the fastest  Brit Bike...
« Last Edit: April 30, 2019, 09:51:51 AM by Rough Edge racing »

Offline larrys

  • Gaggle Hero
  • *****
  • Posts: 1430
  • Location: SE CT
Re: Trident parts, Tulsa CL 150 bucks
« Reply #5 on: May 01, 2019, 02:43:04 PM »
Its worth the money just for the engine castings and the oil cooler.
Larry
'13 Monster 1100 EVO
'95 Cal 1100
'68 Bonneville

MGNOC 7248

 

***Wildguzzi Official Logo High Quality 5 Color Window Decals Back In Stock***
Shipping in USA Only. Awesome quality. Back by popular demand. All proceeds go back into the forum.
Best quality vinyl available today. Easy application.
Advertise Here