General Category > General Discussion

Center Stand: Cali II vs G5 (and Swingarm)

(1/2) > >>

Groover:
Hello, does anyone know what the difference is between the center stand between the California II model and an 81 G5? They look identical, and from what I understand, both models have the same frame - What's the difference?

The Cali II part number is: 29430300
The G5 part number is: 18430360

Also, can the swingarm from a California II be mounted on the G5? I think (not 100% sure though) that the Cali II has an indentation on the swing arm to fit a 120/90/18 tire, whereas the G5 doesn't have that indentation - Are they the same otherwise?

Thanks for the assistance!

guzzisteve:
Centerstand is the arm is abit different.

Swingarm on Cal2 is longer than G5 and has a stiff bar across in front of tire. I run a 130 on my Cal2 rear or 5.10.

Groover:
Thanks for the reply. Is the difference on the stand to fit the muffler cutout maybe? Do you think I'll I be able to use the Cal2 stand on the G5 with OEM mufflers?

I didn't realize the Cal2 had a longer swingarm - does that mean the wheel base (distance between front axle and rear axle) is different on the cal2 vs the other Tonti frames? (T3, Convert, G5)

Thanks again.

guzzisteve:
Should fit, no cutout on Cal2 mufflers like on G5/T3

Wheelbase is longer front and back of bike.

Groover:
Ok, thanks again - sorry, one more questions and I'll stop, I promise! The G5, convert, T3 have straight mufflers, whereas the California II, SP, etc. have upsweep mufflers. Can the upsweep muffler be mounted on the stock G5, Convert headers/crossover, or would those need to be changed to mount the upsweep type mufflers?

Navigation

[0] Message Index

[#] Next page