Wildguzzi.com
General Category => General Discussion => Topic started by: 07Griso on November 02, 2015, 05:09:27 PM
-
When I put the display function selector in the mode setting (bottom setting) I get a blank screen on the dash. Everything is working fine in the Trip 1 and Trip 2 setting. I recently removed the battery to have it tested and after all was fine, I reinstalled the battery. Now I am getting a blank screen on the dash in the mode setting. The bike has 5000 miles on it and I've never seen this problem before. I have in the past disconnected the battery and reinstalled and never ran into this situation.
Any tips or suggestions are appreciated.
-
Try disconnecting the battery and turning on the ignition and leaving it overnight.
pete