Author Topic: Disk Front brake line length - v7 sport  (Read 580 times)

Offline 1down5up

  • Hatchling
  • **
  • *
  • *
  • *
  • *
  • *
  • Posts: 177
  • Location: Sydney NSW Australia
Disk Front brake line length - v7 sport
« on: March 27, 2020, 02:12:04 AM »
All, had a search but didn't turn up anything.

I'm rebuilding a particularly ratty lm2 into a V7 sport clone and am hoping someone can help me with brake line length for twin disks (front mount callipers), along with line length from the rear m/c to the rear caliper(no hard line, braided hose all the way)

Anyone with a tonti with delinked front brakes and clipons have a length?

Offline 1down5up

  • Hatchling
  • **
  • *
  • *
  • *
  • *
  • *
  • Posts: 177
  • Location: Sydney NSW Australia
Re: Disk Front brake line length - v7 sport
« Reply #1 on: March 27, 2020, 02:47:17 PM »
'73/'74 Sport. Length of original brake lines. Center of banjo bolt hole to center of opposite end banjo bolt hole. Master cyl. to manifold:12 3/8". Manifold to each caliper: 19 5/16". Horst.

Thanks alot for your reply, just to confirm.

Your set up is single line to a manifold splitter, then twin lines down to the callipers (on front of forks).

 

***Wildguzzi Official Logo High Quality 5 Color Window Decals Back In Stock***
Shipping in USA Only. Awesome quality. Back by popular demand. All proceeds go back into the forum.
http://www.wildguzzi.com/Products/products.htm
Advertise Here