Author Topic: V85TT Rear wheel travel  (Read 307 times)

Online Sye

  • New Goose
  • *
  • *
  • Posts: 76
  • Be nice, feel good
  • Location: Liverpool, England
V85TT Rear wheel travel
« on: August 03, 2021, 01:26:24 PM »
Forgive the question but I'm having a bit of a senior moment I think 🤔
Rear shock travel is 102mm or just over 4", so to achieve 30% static sag the shock needs to compress 30.6mm. Simple so far, but...
The shock is mounted at an angle, so the rear wheel travel is not 102mm? So, measuring sag to the rear spindle means nothing unless someone knows what the rear wheel travel is.
A long shot I know but does anyone know the rear wheel travel on a V85tt please?
TIA, Sye

Online Huzo

  • Guzzi Hero
  • *****
  • *
  • *
  • *
  • Posts: 10097
  • Location: Creswick Australia
Re: V85TT Rear wheel travel
« Reply #1 on: August 03, 2021, 01:38:24 PM »
Forgive the question but I'm having a bit of a senior moment I think 🤔
Rear shock travel is 102mm or just over 4", so to achieve 30% static sag the shock needs to compress 30.6mm. Simple so far, but...
The shock is mounted at an angle, so the rear wheel travel is not 102mm? So, measuring sag to the rear spindle means nothing unless someone knows what the rear wheel travel is.
A long shot I know but does anyone know the rear wheel travel on a V85tt please?
TIA, Sye
No Sye I donít, but does it matter ?
Just set your sag @ 30% of full shock travel and you will have 30% of wheel travel wonít you ?

Online Sye

  • New Goose
  • *
  • *
  • Posts: 76
  • Be nice, feel good
  • Location: Liverpool, England
Re: V85TT Rear wheel travel
« Reply #2 on: August 03, 2021, 01:46:05 PM »
You are right of course Huzo but I don't have a second pair of hands to measure the shock length. I use a sag tool to get it right but this measures vertical wheel travel. I would guess that 45mm will be about right but that's 15mm over 30% of shock length.
You can tell me if I'm being dim, I won't mind. 😁
Edit, just had a thought, thanks Huzo. I can set up the sag tool at the same attitude as the shock, then use 30% of shock compression.
« Last Edit: August 03, 2021, 01:50:17 PM by Sye »

Online Huzo

  • Guzzi Hero
  • *****
  • *
  • *
  • *
  • Posts: 10097
  • Location: Creswick Australia
Re: V85TT Rear wheel travel
« Reply #3 on: August 03, 2021, 01:58:33 PM »
Just before the geometry and math professors train their guns on me...
Iíll admit that the relationship between shock compression and swingarm rotation is not linear. As the angle between the shock and the swingarm increases upon compression, you will get less shock compression for each degree of swingarm rotation.
But the rate of change in the relationship will be indiscernible Iíll cautiously  suggest.

Wildgoose Chase Moto Guzzi

Re: V85TT Rear wheel travel
« Reply #3 on: August 03, 2021, 01:58:33 PM »

Online Moparnut72

  • Guzzi Hero
  • *****
  • *
  • *
  • *
  • Posts: 1089
  • Location: Quincy California
Re: V85TT Rear wheel travel
« Reply #4 on: August 03, 2021, 04:28:22 PM »
Sounds like a related rates question to me. That was the toughest part of the calculus course I took in college, so I can be of no help.    :evil:
kk
Mopar or Nocar
2019 V7lll Special
2016 Audace
1965 Yamaha Santa Barbara - sold to son in law
2017 Harley Slim S - Traded in for Audace
2006 Harley Deuce - Lost in a fire
2006 Sporty - Sold
1976 R90/6 - Sold
1970 R75/5 - Sold

Offline Caffeineo

  • Guzzi B00b
  • Guzzi Mentor
  • ****
  • *
  • *
  • *
  • *
  • *
  • Posts: 828
  • Location: Nampa, Idaho
Re: V85TT Rear wheel travel
« Reply #5 on: August 03, 2021, 06:30:08 PM »
2019 Moto Guzzi Bobber Sport
2013 Beta Evo 300
2014 Husaberg FE501

Online egschade

  • Guzzi Hero
  • *****
  • *
  • *
  • *
  • *
  • *
  • Posts: 1255
  • You can also find me on mgnocnj.forumotion.com
  • Location: Basking Ridge, NJ
Re: V85TT Rear wheel travel
« Reply #6 on: August 03, 2021, 06:47:36 PM »
With the shock fully extended put a twist tie on the shaft and slide it down to the shock body. Lift the bike off the stand carefully so you don't bounce the suspension. Put it back up on the stand and measure how far the twistie moved. Can do the same with the forks...
The elder Eric in NJ
2020 V85TT Adventure

Past Guzzis:
V7 III
Griso 1200SE
Breva 1100
EV Touring

Online Sye

  • New Goose
  • *
  • *
  • Posts: 76
  • Be nice, feel good
  • Location: Liverpool, England
Re: V85TT Rear wheel travel
« Reply #7 on: August 04, 2021, 01:28:56 AM »
Rear Travel (in/mm)    6.7 / 170

Found on https://www.motorcycle.com/specs/moto-guzzi/touring/2020/v85/tt-adventure/detail.html

That's exactly what I needed, thanks Caffeineo  :thumb:

Rear wheel travel 170mm, static sag 51mm or 2".

Online Vagrant

  • Guzzi Hero
  • *****
  • *
  • *
  • *
  • *
  • *
  • Posts: 1568
  • Location: Gainesville, Ga or Green Valley Az.
Re: V85TT Rear wheel travel
« Reply #8 on: August 04, 2021, 03:18:56 PM »
Frame and suspensions
FRAME
Specification Desc./Quantity
Type High strength steel tube
Steering rake 25.7į
Trail 128.3 mm (5.05 in)
SUSPENSIONS
Specification Desc./Quantity
Front hydraulic telescopic fork diam. 41 mm (1.61 in)
Stroke 168 mm (6.61 in)
Rear Swingarm in die-cast light alloy with 1 shock absorber with adjustable spring pre-load and rebound damping.
Stroke 102 mm (4.02 in)

This is from the on line shop book. I think it's wrong! I set mine at 2" but it took 7-10000 miles to get that much.
HE IS FREE WHO LIVES AS HE CHOOSES
2001 EV, 2017 V7-III Blue special, 2020 V85 the fast red one!
L-196, L-197

Online Sye

  • New Goose
  • *
  • *
  • Posts: 76
  • Be nice, feel good
  • Location: Liverpool, England
Re: V85TT Rear wheel travel
« Reply #9 on: August 05, 2021, 08:45:40 AM »
Frame and suspensions
FRAME
Specification Desc./Quantity
Type High strength steel tube
Steering rake 25.7į
Trail 128.3 mm (5.05 in)
SUSPENSIONS
Specification Desc./Quantity
Front hydraulic telescopic fork diam. 41 mm (1.61 in)
Stroke 168 mm (6.61 in)
Rear Swingarm in die-cast light alloy with 1 shock absorber with adjustable spring pre-load and rebound damping.
Stroke 102 mm (4.02 in)

This is from the on line shop book. I think it's wrong! I set mine at 2" but it took 7-10000 miles to get that much.

That's correct information Vagrant. The shock stroke is 102mm but because it's at an angle, the wheel travel is 170mm, so the sag needs to be 50 - 60mm.


Harper's Moto Guzzi
Harper's Moto Guzzi. Where we still answer the phone, use the highest quality parts, and also do Transmission, rear drive, and carb rebuilds fast. Call us at 816.697.3411 and get your problems resolved.
http://www.harpermoto.com
Advertise Here
 

20 Ounce Stainless Steel Double Insulated Tumbler with donation credit
Buy a quality tumbler and support the forum at the same time!
Better than a YETI! BPA and Lead free.
Advertise Here