New 20 ounce tumblers available now! Forum donation credit with purchase. https://www.wildguzzi.com/Products/products.htm#Tumbler
Guzzi changed mapping like their shorts go by year is better. May be the same as a Jackal.I have a California bin 15M C3 61600.381.01 501604710400 , don't know what it's from.What does the tag say on outside of ECU?What XDF file are you using? TunerPro or other?
How does it run? I had terrible running issues with my 02 stone when I got it, and tried a few different maps till I got one that was close. If its running well, I would just work with what you have. SOme of the stock maps were pretty bad.
Get a Beetle map and ride. https://inner.forumotion.com/f12-beetlemaps
Hi! I’m using the latest XDF file available on the official guzzidiag web page for the California 1100 Stone (version 2.52 if I remember correctly)The ECU is a 15M, and I think there are no differences between Stone and Jackal.Would you like to send me the original bin file?Thank you.
For Beetle Maps------------------------------------http://www.griso.org/If you send me your email via PM, I'll send you what I have. I have never used it but have looked at it, don't know what model it came from.Has your bike always run crappy? Is it something new?
What did you set the TPS to. I seem to remember 515-540 for that one. Has the TPS been replaced recently? It's old and a common issue. There is a site I don't remember the name that sells them for under a $100. Search it here. On my 2001 the trim had to be at +30 or I had issues. Take care of the basics before worrying about a map.
PS about the CO TRIM, I found it at -4 value, but I’m not able to correct to 0. The value seems like no saving when guzzidiag tell me to shut off the emergency sto button!Thank you.
That would help to get the trim up. There are some oddities to getting the trim to set, like it needing to be at full temperature.
As Wayne mentioned, and Guzzidiag should as well. The bike needs to be up to a certain temp to adjust and save the trim. IIRR 60C. DG should say the temp.Is the Tuner Pro still on the bike or did you remove it? Tuner Pro should not alter the factory installed map in the ECU. Someone could have altered the stock map to make it work better with TP, but I doubt it.When you set the TPS. You said " and so on for the tune up". When you did the TPS, you followed the instructions about removing the tie rod between the TB's? Set the TPS side and balance in the other correct?I can send you an EV Touring bin, but I don't know what the differences are to a Stone.Toom
I have two maps saved on my computer. One is a 61601-381-02 and the other is 61600-035-00. I don't know which is better or what the difference is. I can say that they both work on my 2003 california ev.
Hi! I’ve a decent result now.But I really appreciate if you send me your file for further testing on my bike.Thank you very much!