Sport 1100 Float bowl fiber washer?

[jwinwi]

Haven't had a chance to dig in to my charge light issue yet...
Also found a leaky float bowl drain and the fiber washer is only available in a kit...
Anyone have the specs or a McMaster Carr PN?
Thank you in advance.
John Wendt in Wisconsin

[RinkRat II]

 I believe if you carried that drain bolt into your local small engine/ snowmachine shop, they probably have a gasket to match in their parts bin. My $.02

    Paul B

[jwinwi]

I believe if you carried that drain bolt into your local small engine/ snowmachine shop, they probably have a gasket to match in their parts bin. My $.02

    Paul B

Thanks Paul, will give it a shot. If memory serves  my go-to Guzzi parts source (Ace Hardware) didn't have anything close because of the large ID relative to the OD...

[Guzzidad]

  Send MedicAndy a PM. I gave him a whole box of carburator parts when he bought my Sport.

[nc43bsa]

Try Bevel Heaven.

https://store.bevelheaven.com/

[Ratso88]

If you can figure out what size is required I like Bell Metric at BellMetric.com.

I've ordered plenty of stuff from them over the years. Stock up.

[Antietam Classic Cycle]

How many do you need? I have six in stock, can mail one (or more) out on Monday.

[jwinwi]

Thanks for all the responses.
Once again MG has the goods:  https://www.mgcycle.com/index.php?main_page=product_info&cPath=34&products_id=1403
OD is 4mm (?) larger than the nut but it's good to know they're there.

[Antietam Classic Cycle]

My offer stands. Genuine Dellorto bowl nut gaskets.

[Chuck in Indiana]

My offer stands. Genuine Dellorto bowl nut gaskets.

Charlie.. One of the gaskets on the 36s on the AeroLario is starting to weep. I'll gladly take you up on that and pay you on Tuesday for a hamburger on Monday.. 

[Antietam Classic Cycle]

Charlie.. One of the gaskets on the 36s on the AeroLario is starting to weep. I'll gladly take you up on that and pay you on Tuesday for a hamburger on Monday.. 

Sent you a PM.