Author Topic: California EV spoke wheel recall flange  (Read 219 times)

Online sdcr

  • Guzzi Hero
  • *****
  • *
  • Posts: 1457
  • Location: Pennsylvania
California EV spoke wheel recall flange
« on: September 21, 2021, 02:47:22 PM »
For those that know, is this the flange that would be installed on the tubeless spoke wheels?


« Last Edit: September 21, 2021, 03:28:24 PM by sdcr »
John
2001 EV California
2009 Jaguar XK

Offline pehayes

  • Guzzi Hero
  • *****
  • *
  • *
  • *
  • *
  • Posts: 4142
    • Falcone Touring
Re: California EV spoke wheel recall flange
« Reply #1 on: September 21, 2021, 03:12:37 PM »
Yes, that sheet metal ring.  Three screws.  Doesn't prevent spoke breakage.  Just prevents the broken tip from falling between  the rotating wheel and the stationary drive box.  Bad juju.  For the '98EV, in the U.S. Guzzi was required to replace the entire wheel and include the ring.  In the UK, Guzzi was only required to add the ring to the existing wheel.

Patrick Hayes
Fremont CA
two EV's

Online sdcr

  • Guzzi Hero
  • *****
  • *
  • Posts: 1457
  • Location: Pennsylvania
Re: California EV spoke wheel recall flange
« Reply #2 on: September 21, 2021, 03:16:59 PM »
Thanks Pete. Well, Iím glad the previous owner had the recall done.

Splines were quite dry when I pulled the wheel. Going to use some of the same stuff that I use on my BMW.

Yes, that sheet metal ring.  Three screws.  Doesn't prevent spoke breakage.  Just prevents the broken tip from falling between  the rotating wheel and the stationary drive box.  Bad juju.  For the '98EV, in the U.S. Guzzi was required to replace the entire wheel and include the ring.  In the UK, Guzzi was only required to add the ring to the existing wheel.

Patrick Hayes
Fremont CA
two EV's
John
2001 EV California
2009 Jaguar XK

Offline Zoom Zoom

  • Guzzi Hero
  • *****
  • *
  • *
  • Posts: 11546
  • Northeast Ohio
Re: California EV spoke wheel recall flange
« Reply #3 on: September 21, 2021, 04:36:25 PM »
Already answered. Mine had that plate from the factory, but it had to be inspected and signed off on.

The only other recall for the '01's that I can think of was to add the second cable to the throttle. If your bike does not have two then it never got done.

John Henry
A wide, unfettered road ahead,
and the flying motor singing.
Samuel C. Lancaster 1921

Wildgoose Chase Moto Guzzi

Re: California EV spoke wheel recall flange
« Reply #3 on: September 21, 2021, 04:36:25 PM »

Online sdcr

  • Guzzi Hero
  • *****
  • *
  • Posts: 1457
  • Location: Pennsylvania
Re: California EV spoke wheel recall flange
« Reply #4 on: September 21, 2021, 06:37:25 PM »
So John, I should see them at the handlebar.

Already answered. Mine had that plate from the factory, but it had to be inspected and signed off on.

The only other recall for the '01's that I can think of was to add the second cable to the throttle. If your bike does not have two then it never got done.

John Henry
John
2001 EV California
2009 Jaguar XK

Offline nc43bsa

  • Guzzi Mentor
  • ****
  • *
  • *
  • *
  • *
  • Posts: 955
  • Location: Mooresville NC
Re: California EV spoke wheel recall flange
« Reply #5 on: September 21, 2021, 07:05:33 PM »
Thanks Pete. Well, Iím glad the previous owner had the recall done.

Splines were quite dry when I pulled the wheel. Going to use some of the same stuff that I use on my BMW.

It does look like they've been dry for a little while.   :grin:
1990 MilleGT

Online rodekyll

  • Guzzi Hero
  • *****
  • Posts: 21375
  • Not my real name
Re: California EV spoke wheel recall flange
« Reply #6 on: September 21, 2021, 07:18:42 PM »
sdcr -- yes, both throttle cables should be visible coming out of the bottom of the throttle grip.  If not, there should be a round plug next to the only cable where it should be.

Online sdcr

  • Guzzi Hero
  • *****
  • *
  • Posts: 1457
  • Location: Pennsylvania
Re: California EV spoke wheel recall flange
« Reply #7 on: September 21, 2021, 07:44:35 PM »
Rodekyll,

Yep, :thumb:, two cables coming from the throttle grip.

Really starting to gel with this EV. Tires are about 85% worn, so Iím getting a set of new Shinko 230 series ďtouringĒ tire. Never used these before, but I was able to match correct size for front and back, 130/90-17 and 110/90-18. Iím sure it will feel better after these are on.

sdcr -- yes, both throttle cables should be visible coming out of the bottom of the throttle grip.  If not, there should be a round plug next to the only cable where it should be.
John
2001 EV California
2009 Jaguar XK


Harper's Moto Guzzi
Harper's Moto Guzzi. Where we still answer the phone, use the highest quality parts, and also do Transmission, rear drive, and carb rebuilds fast. Call us at 816.697.3411 and get your problems resolved.
http://www.harpermoto.com
Advertise Here
 

***Wildguzzi Official Logo High Quality 5 Color Window Decals Back In Stock***
Shipping in USA Only. Awesome quality. Back by popular demand. All proceeds go back into the forum.
http://www.wildguzzi.com/Products/products.htm
Advertise Here