Author Topic: The New Improved GuzziDiag Tutorial  (Read 139497 times)

Offline HarveyMushman

  • Gosling
  • ***
  • Posts: 349
    • Photo Galleries
  • Location: Virginia, USA
Re: The New Improved GuzziDiag Tutorial
« Reply #480 on: June 25, 2023, 05:05:46 PM »
Hey guys,

Am I right in understanding that the 2023 Moto Guzzi v7 Stone uses the MIU G4 ECU? If so, what links should I be using for this tutorial?

Mine shouldn't be the last word on this, but I think the current 850's are Euro5 and not the playground of GuzziDiag. 
Tim

Offline MinnesotaRider

  • New Egg
  • *
  • Posts: 2
  • Location: United States
Re: The New Improved GuzziDiag Tutorial
« Reply #481 on: June 27, 2023, 05:00:38 PM »
Mine shouldn't be the last word on this, but I think the current 850's are Euro5 and not the playground of GuzziDiag.

Ah.

That is disappointing to hear. So am I SOL as far as trying to find and troubleshoot my motorcycle’s error codes myself then? Or is there an alternative?

Offline LlewellynvN

  • New Egg
  • *
  • Posts: 1
  • Location: South Africa
Re: The New Improved GuzziDiag Tutorial
« Reply #482 on: June 30, 2023, 11:42:30 PM »
Hey Guys

I am struggling a bit to connect the software, currently I think the issue lies with my OBD2 and not the link up with the Bike (V7 Stone 1)

I am using a bbfly OBD2 which does boast the ftdi 232rl chip, ive used this product succesfully on my cars so it is operational.

the 3 point adapter is the one in the picture, I saw somewhere that is should be correct.

However using this setup, doesnt matter what I try I get the same result in the adapter test- just jumbled up letters or characters. The Voltage to the adapter is fine 12.7V, i can try different ports, bike connected or not, ignition on or off, just the cables, just the obd2 - I always get the same result unless the cable is disconnected from the pc of course.

Any ideas or just an incompatible OBD2 ?









Offline pauldaytona

  • Gaggle Hero
  • *****
  • Posts: 2562
    • Paul's fast Guzzi Page
Re: The New Improved GuzziDiag Tutorial
« Reply #483 on: July 02, 2023, 05:41:56 AM »
I don't think your bbfly is compatible. It does Can bus too, where the needed kkl is serial kkl only.
Just order the right adapter at lonelec

https://www.lonelec.com/product/guzzidiag-jpdiag-ducatidiag-tuneecu-kit-kl-1talia-3-pin-connection/




Hey Guys

I am struggling a bit to connect the software, currently I think the issue lies with my OBD2 and not the link up with the Bike (V7 Stone 1)

I am using a bbfly OBD2 which does boast the ftdi 232rl chip, ive used this product succesfully on my cars so it is operational.

the 3 point adapter is the one in the picture, I saw somewhere that is should be correct.

However using this setup, doesnt matter what I try I get the same result in the adapter test- just jumbled up letters or characters. The Voltage to the adapter is fine 12.7V, i can try different ports, bike connected or not, ignition on or off, just the cables, just the obd2 - I always get the same result unless the cable is disconnected from the pc of course.

Any ideas or just an incompatible OBD2 ?








Paul

Daytona 1225, Stelvio 1151





Download Guzzidiag here: http://www.von-der-salierburg.de/download/GuzziDiag/

Wildguzzi.com

Re: The New Improved GuzziDiag Tutorial
« Reply #483 on: July 02, 2023, 05:41:56 AM »

Offline Barnapkin

  • New Egg
  • *
  • Posts: 1
Re: The New Improved GuzziDiag Tutorial
« Reply #484 on: October 11, 2023, 08:32:14 PM »
Related topic: If I wanted to compare two bin files, then how can that be done?  I want to learn what maps are in the bin files.  I have a stock and race ECU.  I'd like to download them to see what is different.  For example : It would be nice to know where I could richen up low rpm light engine loads to eliminate lean popping.

Thank you 

Offline guzzisteve

  • Gaggle Hero
  • *****
  • *
  • Posts: 11453
  • "Just Ride It"
Re: The New Improved GuzziDiag Tutorial
« Reply #485 on: October 11, 2023, 08:46:31 PM »
For that you would use the Tunerpro software. Search for a thread on that software.
"Pray through Carlo & your bike shall be healed"
Location: Planet Earth

Offline John Warner

  • Gosling
  • ***
  • *
  • Posts: 265
  • Growing old is mandatory, growing up is not . . .
    • Stelvio/V85 Owners Group FB
  • Location: South Bucks, UK
The New Improved GuzziDiag Tutorial
« Reply #486 on: October 15, 2023, 02:26:25 PM »

 Just a quick 'Heads-Up' on the Injector test function in GD, on the 5AM Bikes.

 L/H Injector does not operate when selected, R/H side does when either side is selected.

Has caused me a bit of head-scratching a couple of times.

I contacted Bernd (GD Creator) to ask him about it, got this reply . . .

Quote
I never heard of this.
But I don't know how many people ever did these tests.
At the time of implementation it was working correctly, but I can not remember which bike it was.
I will have a look in the 5AM code to check this and ask a friends of mine with a Norge 2V to make a cross check.

Shortly after, he sent this . . .

Quote
Ups ... You found a bug.
I will fix it asap.

So there we go, soon we'll be able to test both sides independently.
Doc out . . .
Stelvio Owners Group on FB ~ https://www.facebook.com/groups/888995181188209/?fref=nf

Offline Huzo

  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • *
  • Posts: 13260
  • Location: Creswick Australia
Re: The New Improved GuzziDiag Tutorial
« Reply #487 on: October 15, 2023, 04:11:52 PM »
Just a quick 'Heads-Up' on the Injector test function in GD, on the 5AM Bikes.

 L/H Injector does not operate when selected, R/H side does when either side is selected.

Has caused me a bit of head-scratching a couple of times.

I contacted Bernd (GD Creator) to ask him about it, got this reply . . .

Shortly after, he sent this . . .

So there we go, soon we'll be able to test both sides independently.
Marvellous… :bow: :thumb:

Offline Huzo

  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • *
  • Posts: 13260
  • Location: Creswick Australia
Re: The New Improved GuzziDiag Tutorial
« Reply #488 on: November 24, 2023, 09:15:05 PM »
Bumped for

Offline RickiBrown

  • New Egg
  • *
  • Posts: 1
Re: The New Improved GuzziDiag Tutorial
« Reply #489 on: January 17, 2024, 03:42:42 PM »
I can DOWNLOAD to my mac OS Catalina version 10.15.7
But I cannot open file.
Any clues working on my 2003 Lemans V11

Online Tom H

  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • *
  • *
  • Posts: 3387
  • Location: So. Cal.
Re: The New Improved GuzziDiag Tutorial
« Reply #490 on: January 18, 2024, 10:15:34 AM »
I don't have an answer for you except to make sure your getting the Mac version of GD. Then you might just have to google it for your Mac version to get it to work.

Hopefully someone will be here shortly with some better help!

Tom
2004 Cali EV Touring
1972 Eldo
1970 Ambo V1000
1973 R75/5 SWB with Toaster
2007 HD Street Bob
1953 Triumph 6T (one day it will be on the road!)

Offline SemperVee

  • My life will be told in MC people and experiences more than anything else.
  • Gaggle Mentor
  • ****
  • Posts: 854
  • USMC Retired
  • Location: Seattle - ish
Re: The New Improved GuzziDiag Tutorial
« Reply #491 on: January 18, 2024, 11:05:20 AM »
I can DOWNLOAD to my mac OS Catalina version 10.15.7
But I cannot open file.
Any clues working on my 2003 Lemans V11

I use the same on my Macbook with OS Catalina.   MAKE sure you have the correct Read and Write files.  I would have them open on the desk top.  I am assuming you have the correct ECM selected also?
2007 MG Norge - Hi Ho Silver! - La Dolce Vita
CalSci Tall Windshield
Heli-Bars
Matris Fork + SAG set
Eibach Rear spring
Salamander HB ends
K&N  filter
StainTune pipe
Metal gas fltr
Givi Rear rack
Givi V46 Box and Rack
Startus Interuptus
Napoleon Mirrors
Grip Puppies

Online GuzziOrDeath

  • Hatchling
  • **
  • Posts: 119
Re: The New Improved GuzziDiag Tutorial
« Reply #492 on: January 20, 2024, 03:11:01 PM »

For MacOS, GuzziDiag tools must be in the Application folder, and you must set the correct permissions. Have a look at this video. It may help.


https://www.youtube.com/watch?v=sWSySXfR17c


Alternatively, use GuzziDiag v0.46 for Mac.


https://www.dropbox.com/s/2xvp9m3tc803t9y/GuzziDiag_V0.46.app.zip?dl=0










Offline johnwesley

  • Gosling
  • ***
  • Posts: 205
  • Location: Mena, ar
Re: The New Improved GuzziDiag Tutorial
« Reply #493 on: February 19, 2024, 08:07:21 AM »
I have a 09 vintage that runs great and is easy to start unless it gets cold outside. any time it gets below about 40 degrees it doesn't want to start. If I open the fast idle it won't start. if I leave the fast idle lever closed it will eventually start. once started then I can use the fast idle to get rpms up until its warm. Does anyone have a map that address this issue?
2009 cal-vin
2003 cal ev
1985 lemans 1000

Offline jrt

  • Gaggle Hero
  • *****
  • *
  • *
  • *
  • Posts: 1000
Re: The New Improved GuzziDiag Tutorial
« Reply #494 on: February 19, 2024, 10:10:50 AM »
I have a 09 vintage that runs great and is easy to start unless it gets cold outside. any time it gets below about 40 degrees it doesn't want to start. If I open the fast idle it won't start. if I leave the fast idle lever closed it will eventually start. once started then I can use the fast idle to get rpms up until its warm. Does anyone have a map that address this issue?
I can't help with a map, but my wife's Breva used to do this as well.  My cheap fix was to button the starter with the throttle open some and after one/two turnovers let the throttle snap shut.  Started every time that way.
L-720
1973 Eldorado
2003 Yardbird (1100 hydro)
2020 R1250RS

Offline HarveyMushman

  • Gosling
  • ***
  • Posts: 349
    • Photo Galleries
  • Location: Virginia, USA
Re: The New Improved GuzziDiag Tutorial
« Reply #495 on: February 25, 2024, 07:12:21 AM »
I have a 09 vintage that runs great and is easy to start unless it gets cold outside. any time it gets below about 40 degrees it doesn't want to start. If I open the fast idle it won't start. if I leave the fast idle lever closed it will eventually start. once started then I can use the fast idle to get rpms up until its warm. Does anyone have a map that address this issue?

Beetle's map helps, and noticeably improves mid-range performance.
Tim

Offline HarveyMushman

  • Gosling
  • ***
  • Posts: 349
    • Photo Galleries
  • Location: Virginia, USA
Re: The New Improved GuzziDiag Tutorial
« Reply #496 on: February 25, 2024, 07:34:10 AM »
I "upgraded" my little garage Lenovo to Windows 11 and now GuzziDiag doesn't work. When I open v.60 (with no cables attached) no COM port is listed--the dropdown list is empty. If I open GuzziDiag with cables attached I sometimes get a port but GD won't connect to the ECU--it waits a few seconds and tells me to switch off the ignition. I've tried uninstalling/reinstalling (GuzziDiag and Windows 11), multiple re-starts, etc. I downloaded and extracted the drivers from the page linked on the GD page.

Before I revert back to Windows 10 is there something I'm missing?
Tim

Online GuzziOrDeath

  • Hatchling
  • **
  • Posts: 119
Re: The New Improved GuzziDiag Tutorial
« Reply #497 on: February 25, 2024, 03:56:06 PM »

Open Device Manager. Connect the OBD USB cable. Confirm a COM port appears, and if so what number. If nothing happens, try another USB port.

Delete the GuzziDiag .ini file, then open GuzziDiag and check the connection settings. Select the port previously noted.

Try to connect.







« Last Edit: February 25, 2024, 03:56:43 PM by GuzziOrDeath »

Offline HarveyMushman

  • Gosling
  • ***
  • Posts: 349
    • Photo Galleries
  • Location: Virginia, USA
Re: The New Improved GuzziDiag Tutorial
« Reply #498 on: February 26, 2024, 03:44:27 PM »
Open Device Manager. Connect the OBD USB cable. Confirm a COM port appears, and if so what number. If nothing happens, try another USB port.

Delete the GuzziDiag .ini file, then open GuzziDiag and check the connection settings. Select the port previously noted.

Try to connect.

That worked. Connected and uploaded a new map to the Stelvio. Thank you.
Tim

***Wildguzzi Official Logo High Quality 5 Color Window Decals Back In Stock***
Shipping in USA Only. Awesome quality. Back by popular demand. All proceeds go back into the forum.
http://www.wildguzzi.com/Products/products.htm
Advertise Here
 

***Wildguzzi Official Logo High Quality 5 Color Window Decals Back In Stock***
Shipping in USA Only. Awesome quality. Back by popular demand. All proceeds go back into the forum.
http://www.wildguzzi.com/Products/products.htm
Advertise Here