General Category > General Discussion

Master cylinder setup needed

(1/2) > >>

stmike:
I'm looking to delink the brakes on my CalVin, and need a front brake master cylinder/reservoir/lever to replace the stocker. From what I understand, the mc should have a 17 to 20 mm bore.  Anybody have a functional and cosmetically decent one they want to sell?

Murray:
20mm is pretty big are you talking radial or axial mounted master cylinders? For axial I suggest all you need is a 16-17mm master 16 standard fit to the 916 and 17 to the 998.

rodekyll:
+1
20 mm if it's a radial.  I've done 19mm radial and didn't quite have enough.

stmike:
Thanks for the info Murray and Rodekyll.  I would like to find a clean, reasonably priced Ducati unit.  Some else suggested the 18 off a 749/999.

Orange Guzzi:
If you have fat bars with 7/8 inch ends, you will need to get the correct offset on the mounting bracket for clearance.  Brembo makes them. 

Navigation

[0] Message Index

[#] Next page